Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C6RA90137A
(Correction)
RSC Adv., 2017, 7, 3506-3506
Correction: Engineering-scale superlubricity of the fingerprint-like carbon films based on high power pulsed plasma enhanced chemical vapor deposition
Zhenbin Gongab,
Jing Shiab,
Wei Maa,
Bin Zhanga and
Junyan Zhang*a
aState Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China. E-mail: zhangjunyan@licp.cas.cn
bUniversity of Chinese Academy of Sciences, Beijing, 10049, China
Received
19th December 2016
, Accepted 19th December 2016
First published on 4th January 2017
Abstract
Correction for ‘Engineering-scale superlubricity of the fingerprint-like carbon films based on high power pulsed plasma enhanced chemical vapor deposition’ by Zhenbin Gong et al., RSC Adv., 2016, 6, 115092–115100.
An incorrect version of Fig. 3 was published; the corrected version is shown below:
 | ||
| Fig. 3 (a–c) The friction coefficient curves as a function of rubbing cycles at different humidity against Al2O3, Si4N3, and steel ball, respectively. (d) Friction coefficient curves of the FP-C:H films in a dry air atmosphere under a load from 2 N to 20 N, the inset shows the friction coefficient as a function of load. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2017 |