Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Applying thermo-destabilization of microemulsions as a new method for co-catalyst loading on mesoporous polymeric carbon nitride – towards large scale applications
M.
Schröder
,
K.
Kailasam
,
S.
Rudi
,
K.
Fündling
,
J.
Rieß
,
M.
Lublow
,
A.
Thomas
,
R.
Schomäcker
and
M.
Schwarze
*
Technische Universität Berlin, Institut für Chemie, Straße des 17. Juni 124, 10623 Berlin, Germany. E-mail: ms@chem.tu-berlin.de
First published on 11th February 2015
Abstract
Correction for ‘Applying thermo-destabilization of microemulsions as a new method for co-catalyst loading on mesoporous polymeric carbon nitride – towards large scale applications’ by M. Schröder et al., RSC Adv., 2014, 4, 50017–50026.
(1) Fig. 3 in the paper has a wrong y-axis. The correct figure is shown below.
 | ||
| Fig. 3 H2 evolution rate and Pt loading as a function of the initial Pt concentration for in situ and ex situ treated mp-CN (1.3 g L−1 mp-CN, 10 vol% TEOA, 298 K, solar simulator 1000 W m−2). | ||
(2) On page 50022, the following sentence “However, Fig. 3 illustrates that for the same initial weight fraction, the effective Pt loading for the ex situ treated carbon nitride is about ten times higher.” should be changed to “However, Fig. 3 illustrates that for the same initial weight fraction, the effective Pt loading for the ex situ treated carbon nitride is about five times higher”.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2015 |