RSC Advances  

Development of a new n-p polymer based on the electropolymerization of a dual-functional porphyrin-EDOT monomer. The ambipolar polymeric material showed promising pseudocapacitive behavior for energy storage devices.

State-of-the-art processes for the band gap tuning of perovskite solar cells for enhancing their efficiency and stability.

High efficiency hydrocracking degradation of mixed polyolefin polymers is achieved under mild circumstances by Ni-based catalysts supported on Hbeta.

A novel phosphate-containing polymer PPEGMA–PVPA was synthesized via solution radical copolymerization. The polymer exhibited better adsorption–dispersion performance in cement paste than the reference polycarboxylate superplasticizer.

Because of their distinctive characteristics, ferroelectric perovskites are considered among the most potent and auspicious candidates for energy storage and pulsed power devices.

Mesoporous TiO₂ thin films with a crystalline structure were effectively produced and analyzed after modification with Fe and Ni porphyrins. The collaborative impact of these metal complexes was evaluated to determine if the simultaneous presence of both metalloporphyrins enhances the OER activity.

The study investigated the impact of hard segments (HS) content on the morphology and thermomechanical properties of electrospun aliphatic poly(carbonate-urea-urethane)s (PCUUs).

Chitosan, polyvinyl alcohol (PVA), and polyvinyl pyrrolidone (PVP) were used to formulate a controlled transdermal drug delivery system for tramadol.

We embed the LM in the internally interconnected porous structure of flexible foam, in which the LM endows the as-fabricated capacitive sensor with outstanding pressure sensitivity.

This study presents a method for synthesizing high-efficiency photocatalysts by using grapefruit peel to create porous TiO₂ containing C, P, and K. innovating photocatalytic material preparation.

LiCl in situ decorated MOF-derived porous carbon sorbents (PCl-4) were prepared from Li-MOFs for atmospheric water harvesting. PCl-4 displays excellent water-capture capabilities and efficient solar-driven water release with nice recyclability.

We report the preparation of a panel of biocompatible PVPylated divalent metal-doped MFe₂O₄ (M= Co, Ni, Zn, Mg, and Sn) ferrites and assess their magneto-thermal abilities for hyperthermia applications. The heating performance directly correlated to their observed magnetic saturation and anisotropy.

A reversible two-channel fluorescent nanocomposite with fluorescence resonance energy transfer (FRET) effect was designed for the development, analysis, and characterization of latent fingerprints (LFPs).

This study pioneers a cost-effective, eco-friendly, scalable spray-coating technique for producing transparent & conductive electrodes with impressive electrical & optical performance, poised to boost the efficiency & stability of next-generation PV.

In this study, through the utilization of the sol–gel combustion tactic, gadolinium (Gd)-doped cerium oxide (CeO₂), Ce_1−xGd_xO₂ (x = 0.00, 0.10, 0.20 and 0.30 (GDC)) ceramics were attained.

A sono-responsive smart nanoliposome loaded with thrombin (TNL) was developed. The structure of TNL collapses under ultrasonic activation and swiftly releases thrombin from the cavity, thereby achieving a precise and rapid local hemostasis.

Utilizing green solvents and raw materials, U-PIs with different morphologies and improved performance were successfully prepared through a solvothermal method.

A facile synthetic method was developed to prepare a biocompatible acid-responsive polycarbonate containing cinnamaldehyde moieties, a potent GSH-depleting agent, for enhancing the anticancer efficacy of etoposide.

A novel Ni–CoSe₂ heterojunction coated with N-doped carbon is designed to modify separators of Li–S batteries, exhibiting the synergism of suppressing shuttle effects and accelerating reaction kinetics.

Here, a molecularly imprinted polymer film (MIP) was prepared on the surface of a disposable carbon screen-printed electrode (C-SPE) using (3-acrylamidopropyl)trimethylammonium chloride (AMPTMA) as a functional monomer and the cancer biomarker carbohydrate antigen 15-3 (CA 15-3) as a template.

Perovskite solar cells (PSCs) compete with conventional solar cells regarding their low-temperature processing and suitable power conversion efficiency.

The V₂O₅ interfacial layer can effectively suppress side reaction between a LiCoO₂ cathode and LiPON electrolyte interface, which enables enhanced lithium ion transport kinetics and electrochemical performance in all-solid-state thin film batteries.

An ultra-low dielectric porous polyimide film with ε′ ∼1.6@1 MHz was fabricated by an NIPS method. FAS-grafted carbon nitride nanosheets endowed the porous film with advanced hydrophobicity and thermomechanical properties.

A high-performance dye adsorbent of Mg/Al-layered double hydroxide modified water hyacinth hydrochar (MgAl@WH) was synthesized by a simple hydrothermal method.

Zinc-ion batteries are promising candidates for large-scale energy storage, and gel polymer electrolytes (GPEs) play an important role in zinc-ion battery applications.