Issue 84, 2019

5.1% efficiency of Si photoanodes for photoelectrochemical water splitting catalyzed by porous NiFe (oxy)hydroxide converted from NiFe oxysulfide

Abstract

A porous NiFe (oxy)hydroxide catalyst fabricated on n+pp+-Si/Ni/NiOx, which is converted from an electrodeposited NiFe oxysulfide, allows a silicon photoanode for water splitting to hit a record 5.1% efficiency with good stability of up to 135 h under 40 mA cm−2 in 1.0 M NaOH.

Graphical abstract: 5.1% efficiency of Si photoanodes for photoelectrochemical water splitting catalyzed by porous NiFe (oxy)hydroxide converted from NiFe oxysulfide

Supplementary files

Article information

Article type
Communication
Submitted
19 ago 2019
Accepted
26 set 2019
First published
27 set 2019

Chem. Commun., 2019,55, 12627-12630

5.1% efficiency of Si photoanodes for photoelectrochemical water splitting catalyzed by porous NiFe (oxy)hydroxide converted from NiFe oxysulfide

W. Zhou, R. Fan, T. Hu, G. Huang, W. Dong, X. Wu and M. Shen, Chem. Commun., 2019, 55, 12627 DOI: 10.1039/C9CC06413C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements