Open Access Article
Riley Dicksonb,
Zhi-Jian Hec and
Li-Heng Cai
*abcd
aSoft Biomatter Laboratory, Department of Materials Science and Engineering, University of Virginia, 228 Wilsdorf Hall, 395 McCormick Road, Charlottesville, VA 22904, USA. E-mail: liheng.cai@virginia.edu; Fax: +1 434-982-5660; Tel: +1 434-924-2512
bDepartment of Chemical Engineering, University of Virginia, 228 Wilsdorf Hall, 395 McCormick Road, Charlottesville, VA 22904, USA
cDepartment of Biomedical Engineering, University of Virginia, 228 Wilsdorf Hall, 395 McCormick Road, Charlottesville, VA 22904, USA
dDepartment of Chemistry, University of Virginia, 228 Wilsdorf Hall, 395 McCormick Road, Charlottesville, VA 22904, USA
First published on 31st October 2025
Pseudomonas aeruginosa is an opportunistic bacterium that is readily cleared by mucus clearance in healthy individuals but becomes infectious in patients with mucus obstructive lung diseases, which are characterized by the formation of bacterial colonies or biofilms. The motility of P. aeruginosa is critical for biofilm formation, but it remains poorly understood how the bacterium transports within native mucus. Existing studies on mucus-bacteria interactions and P. aeruginosa transport within mucus largely rely on reconstituted mucus or purified mucins, which have properties dramatically different from native mucus. Here, we report the transport of P. aeruginosa strain PA14, a human clinical isolate responsible for chronic lung infections, in normal and diseased native human airway mucus. We use well-differentiated human bronchial epithelial cells cultured at the air–liquid-interface to secrete and harvest native human airway mucus with concentrations matching health and disease states. Furthermore, we develop a droplet-in-oil system for quantifying the transport of individual bacterium within bulk mucus. Remarkably, highly viscoelastic normal mucus promotes directional bacterial motility at a speed comparable to that in a low-viscosity physiological buffer. By contrast, concentrated, pathological mucus with elasticity dominating viscosity traps bacteria, reducing their motility more than 10-fold. Engineering mucus simulants with decoupled viscosity and elasticity reveals that the elasticity of complex fluids induces a qualitative change of bacterial motility from circular to directional motion. Our discovery not only provides insights into the biophysical mechanisms of bacterial infection in the lung but also reveals the previously unrecognized importance of elasticity in directional bacterial transport within complex fluids.
The pathogenesis of mucus-obstructive lung diseases is multifactorial but includes a common, disease-initiating step: the generation of excessively concentrated mucus. The concentration of mucus—measured as either the wet-to-dry content of mucus or mucin concentration—has been established as a marker of mucus-obstructive lung diseases.2,3 Under normal conditions, human airway mucus is composed of approximately 98% water, with the remaining 2% solid content consisting of 0.9% salt, 0.8% globular proteins, and 0.3% high-molecular-weight mucin biopolymers. By contrast, the solid content concentration increases to ∼5 wt% for COPD and ∼8 wt% for CF mucus.4,5 The pathological mucus provides an environment favorable for the formation of bacterial colonies or biofilms,6 which further impede mucus clearance and cause chronic infection in mucus-obstructive lung diseases.7,8 In particular, Pseudomonas aeruginosa, an opportunistic Gram-negative bacterium, is the dominant pathogen in late-stage diseases and is implicated in ∼90% of CF related fatalities.9–12
The virulence and capability of P. aeruginosa in forming colonies or biofilms are strongly correlated to its motility,13–15 which is determined by the interactions between bacteria and mucus.16 The properties of mucus are largely determined by mucin biopolymers, which have a long linear peptide backbone densely grafted with many O-linked glycans. In the context of biochemical interactions, using mucins purified from porcine intestinal mucus and human saliva, the Ribbeck Lab discovered that mucin glycans attenuate the virulence of P. aeruginosa by maintaining the cell at planktonic, non-aggregate form.17,18 In the context of biophysical interactions, the Hill Lab19,20 found that P. aeruginosa are prone to form colonies in reconstituted human airway mucus with concentration matching that of the CF condition. These studies provide valuable insights into the role of bacteria-mucin/mucus interactions in the context of bacterial virulence and biofilm formation. However, reconstituted mucus or purified mucins have viscoelasticity and osmotic properties dramatically different from that in native state, as demonstrated in our previous study.21 Consequently, it would be highly valuable to investigate the transport of bacteria through native human airway mucus.
Here, we report the transport of P. aeruginosa strain PA14, a human clinical isolate responsible for chronic lung infections, in normal and pathological native human airway mucus. Using our previously developed method, we harvest native human airway mucus with concentrations matching health and disease states. Furthermore, we develop a droplet-in-oil system for quantifying the transport of individual bacterium within bulk mucus. Viscoelastic normal mucus promotes directional bacterial motility at a speed comparable to that in a low-viscosity physiological buffer. By contrast, concentrated, highly viscoelastic diseased mucus traps bacteria, reducing their motility more than 10-fold. Engineering mucus simulants with decoupled viscosity and elasticity reveals that the elasticity of complex fluids induces a shift in bacterial motility from circular to directional motion. Our discovery reveals the importance of elasticity in directional bacterial transport within complex fluids and provides insights into the biophysical mechanisms of bacterial infection in the lung.
Because of the limited amount of mucus, we develop a water-in-oil droplet system that allows for monitoring the motility of probe particles in bulk mucus of a small volume 40 µL. The system is a cylindrical glass chamber with a diameter of 20 mm and a height of 120 µm. This height is about 100 times the average size of a P. aeruginosa. During experiments, we focus on the cells near the center along the chamber height; this ensures that the distance from the chamber wall is more than 10 times the cell size to avoid boundary effects27 and surface adhesion28 on bacterial motility. To prevent unspecific interactions between the cell and the chamber surface, we pre-wet the chamber with perfluorocarbon oil, a biologically inert fluid that is widely used in droplet microfluidics for biological applications.29 Moreover, the oil is premixed with a fluorinated surfactant molecule that can stabilize water-in-oil droplets for weeks.30 Using this method, we create a mucus-in-oil droplet system that enables monitoring transport of particles in bulk rather than the surface of mucus, as illustrated in Fig. 1d. This capability is validated by confirming that probe particles and bacteria are nearly evenly distributed across the whole chamber height for various kinds of complex fluids (Fig. S2).
(s) of the probed environment to the Laplace transform 〈Δ
2(s)〉 of particle MSD 〈Δr2(t)〉 (Fig. 1e and f):
![]() | (1) |
Because passive microrheology relies on the thermal motion of probe particles, it is critical to prevent unspecific binding between the particles and the surrounding environment. Thus, we use polystyrene microparticles coated with poly(ethylene glycol) (PEG) polymers, a well-established approach for creating mucus inert carriers.34,35 The particle diameter 1 µm is much larger than the correlation length of normal mucus hydrogel, ξ ≈ (kBT/π)3 ≈ 20 nm, in which π ≈ 500 Pa is the osmotic pressure of 2.0 wt% normal mucus.21,36 Such a relatively large particle avoids probing local properties of mucus, which is known to be heterogeneous and exhibits particle size dependent viscoelasticity.37
We record the motion of 1 µm PEGylated particles in normal mucus using high-speed fluorescence confocal microscopy at 50 frames per second (fps). Example trajectories of individual particles are shown in Fig. 2a(i). The accuracy of the particle tracking is confirmed by the overlap of the trajectories with the video for particle diffusion (Video S1). Based on the trajectory of a particle, we compute its MSD versus lag time Δτ, and sample at least 200 trajectories to obtain the average MSD, as shown by the solid green line in Fig. 2b.
As mucus concentration increases, the particle motion becomes more confined, as shown by the trajectories of probe particles in COPD-like (5%) and CF-like (8%) mucus (Fig. 2a(ii) and (iii)) (Videos S2 and S3). To quantify the difference in particle diffusion, we compare the average MSD of probe particles at 30 s, the longest period that the particle trajectories can be reliably tracked before they diffuse out of the focus plane. For the 1 µm particle, the average MSD is ∼0.20 µm2 and 0.09 µm2 in COPD- and CF-like mucus, respectively; these values are an order of magnitude lower than the ∼2 µm2 observed in normal mucus. We also measure the motility of 100 nm PEGylated gold nanospheres within the three mucus formulations. For these 100 nm nanospheres in the CF-like and COPD-like mucus, the average MSD is ∼1.0 µm2 and ∼0.7 µm2, respectively. These values are nearly one order of magnitude lower than that of ∼3 µm2 observed in normal mucus (Fig. S3 and Videos S4–S6). These results highlight the heterogeneity of mucus network mesh size37 and also suggest that the majority of mesh sizes in normal and pathological mucus are likely less than 100 nm.
We use the MSD of 1 µm probe particles to calculate the viscoelasticity of mucus (eqn (1)). At relatively low probing frequency <3 Hz or long-time scales >0.3 s, the normal mucus is more elastic with storage modulus G′ greater than the loss modulus G″. Yet, at relatively high probing frequency >3 Hz, normal mucus is more of a viscous liquid with G′ < G″ (Fig. 2c). The frequency dependent viscoelastic properties of mucus are consistent with the microrheology data using smaller PEGylated Au nanoparticles, which have a diameter 100 nm, much greater than the average mucus mesh size (Fig. S3). Importantly, at a probing frequency 14 Hz comparable to that of ciliary beating,38 the mucus is more of a viscoelastic liquid with a loss modulus of ∼0.1 Pa (green lines, Fig. 2c). This behavior is consistent with the clinical observations that under coordinated ciliary beating, normal mucus behaves like a liquid that can flow out of the human airway.
Interestingly, increasing mucus concentration qualitatively changes the viscoelastic properties. The shear storage modulus of the COPD and CF mucus at the lowest probing frequency 0.1 Hz is approximately 0.4 Pa and 2 Pa, respectively (purple and red lines, Fig. 2c); these values are more than 10 times greater than that of the normal mucus, 0.01 Pa (solid green line, Fig. 2c). Importantly, the storage modulus is greater than the loss modulus across the whole frequency range explored. These results demonstrate that mucus with pathological concentrations become an elastic solid, supporting the clinical observation of impaired or failed mucus clearance in mucus-obstructive pulmonary diseases.4 Collectively, these results indicate that native mucus exhibits viscoelasticity consistent with the understanding of mucus clearance.
In the non-Newtonian, highly viscoelastic normal mucus, P. aeruginosa exhibits bimodal motility (Fig. 3a(ii)). Most bacteria (∼82%) adopt a directional, linear motion featuring a displacement more than 50 µm, about 50 times the bacterium body size, over a period of 0.3–1 s (Video S7). By contrast, in a low viscosity, Newtonian buffer (LB medium), most bacteria exhibit circular motion, as shown by representative trajectories in Fig. 3a(i) (Video S8). A small fraction of bacteria in the normal mucus (∼10%) adopt a confined, localized motion, which features a displacement less than 5 µm over 50 s (Fig. 3a(ii)). These confined bacteria are not stationary, however; they can rotate and sometimes even swim for short distances. Moreover, a bacterium can switch between these two modes. For instance, a bacterium exhibiting linear motion can get stuck and adopt the confined motion. Yet this confinement is temporary, and the bacterium can escape to resume the linear motion, as exemplified by trajectory 3 in Fig. 3a(ii). Moreover, a bacterium can exhibit an intriguing behavior where a linear swimming cell travels back adjacent to, or even along, its initial trajectory, sometimes multiple times over the course of the same path, as exemplified by trajectory 4 in Fig. 3a(ii). The confined bacteria, despite possessing intact flagellum, exhibit similar motility to the non-motile counterpart without flagellum (PA14 ΔfliC) (Fig. S4 and Video S9). Note that prior studies reveal enhanced transport of rod-shaped nanoparticles (100–200 nm in length and 20–30 nm in diameter) within rat intestinal mucus compared to the spherical counterparts. Although the non-motile bacteria are rod like, their size is much greater than mucus mesh size.40 Nevertheless, our results highlight the highly heterogeneous nature of native human airway mucus.
To further explore the difference between the P. aeruginosa motion in LB medium and in normal mucus, we quantify the bacterial motility by computing the MSD of each cell (Fig. 3b). To characterize the type of bacteria motion, we fit the MSD using an equation for describing two-dimensional (2D) diffusion:41
| 〈r2(Δτ)〉 = 4D0(Δτ/τ0)α | (2) |
Despite marked differences in motion type, the average displacement of P. aeruginosa exhibiting directional motion in normal mucus is comparable to that in LB medium, as shown by the adjacent average MSD curves (thick solid lines in Fig. 3b). To further quantify the difference between P. aeruginosa motility in LB and normal mucus, we compare the correlation between effective diffusion coefficient D0 to motion type exponent α for each bacterium, as shown in Fig. S5. For confined bacteria in normal mucus, the average D0 (0.22 ± 0.01 µm2) is more than one order of magnitude lower than that in LB buffer (5.40 ± 0.27 µm2). However, the fraction of confined bacteria is relatively small (18%), much lower than that with directional linear motion (82%) (green bars, Fig. 3c(i)). Consequently, there is no statistically significant difference in average D0 for all cells, as well as for any cells that only exhibit directional motion, as shown by the nearly overlapped thick dashed green line and thick green line in Fig. 3b. Consistent with these observations, for all P. aeruginosa in normal mucus (directional and confined), the average D0 is 2.40 ± 0.29 µm2 and 58% of cells are super-diffusive (α > 1) (left green bar, Fig. 3c(ii)). For P. aeruginosa exhibiting only directional motion, the average D0 is 4.10 ± 0.15 µm2. These values are comparable to bacteria in LB buffer, which have an average D0 of 5.40 ± 0.27 µm2 and 56% cells are super-diffusive. Yet, the average value of α for bacteria in normal mucus is 1.29, higher than 1.04 for cell in LB buffer; this difference further reflects the tendency of P. aeruginosa to adopt linear motion over circular motion in normal mucus. These results show that normal mucus promotes linear directional motion of P. aeruginosa to enable fast transport.
Increasing the mucus concentrations to pathological values dramatically slows the transport of P. aeruginosa, as shown by example trajectories in COPD-like 5% mucus and CF-like 8% mucus (Fig. 3a(iii) and (iv), Videos S10, S11). Compared to P. aeruginosa in normal mucus, in COPD-like mucus, the fraction of bacteria exhibiting directional transport is dramatically lower (44%) and the fraction of confined cells is significantly higher (56%). Rarely do some bacteria displace more than 50 µm, which can be easily achieved by bacteria in normal mucus. Yet the bacteria often can move by a distance ∼20 µm, about 20 times that of the bacterium body size (purple lines, Fig. 3d). By contrast, in CF-like mucus, 82% cells are confined, and few can move >10 µm (light red lines in Fig. 3d, red bars in Fig. 3c(i)). Consistent with this observation, nearly all bacteria (96%) exhibit sub-diffusive motion (red bars, Fig. 3c(ii)). Quantitatively, the average effective diffusion coefficient D0 is 0.10 ± 0.09 µm2 in CF-like mucus, nearly two and a half times lower than that in COPD-like mucus, 0.23 ± 0.16 µm2 (Fig. S6).
To test this hypothesis, we seek to engineer mucus simulants with similar viscosity (or viscous modulus) but various elasticity (or elastic modulus). Historically, achieving this has been challenging due to the complex nature of mucus as a biological hydrogel. However, previous studies, including our own, suggest that the intricate viscoelasticity of mucus arise primarily from three essential molecular features: (i) entanglements formed by large molecular weight (MW) gel-forming mucins, (ii) reversible associations formed by the hydrophobic domains of mucins, and (iii) a relatively large mass fraction of (∼30 wt%) small low MW proteins and molecules within the solid content (excluding salt) of mucus. Instead of using solutions composed of a single polymer species, we use a hybrid polymer solution consisting of low MW alginate and high MW PEO polymers42 as mucus simulants. The low MW alginate allows for tuning viscosity, whereas the high MW PEO can form entanglements, which are known to be responsible for the elasticity of polymer solutions.43 Moreover, the ether oxide groups of PEO and the hydroxyl groups of alginate can form hydrogen bonding,44 a kind of reversible associations that allow for enhanced viscosity at relatively low concentrations. This approach enables the creation of mucus simulants by mimicking the three essential molecular features of mucus.
We denote a mucus simulant as AlgxPEOyz, in which x and y are the concentration (wt/vol%) of alginate and PEO, respectively, and z is the MW of the PEO in g mol−1. Since it is relatively easy to obtain large sample volumes, we use bulk rheology as the primary method to characterize the viscoelasticity of mucus simulants. In contrast, we rely on microrheology to characterize native mucus for two reasons. First, it is difficult to collect enough native mucus for bulk rheology. Second, recent studies suggest that bulk rheological measurements of mucus are strongly influenced by the mucus–air interface.45 Nevertheless, using a mucus simulant as an example, we confirm that both bulk rheology and microrheology yield consistent measurements in viscoelastic properties (Fig. S7).
By tuning the concentration and MW of these two polymers, we create four kinds of mucus simulants, all of which have a viscous modulus at the lowest frequency (0.1 rad s−1) on the order of 10 mPa (empty symbols, Fig. 4a), comparable to that of normal mucus (dashed lines, Fig. 2c). Importantly, for all mucus simulants, the viscous modulus is nearly the same over a wide range of frequency (0.1 to 100 rad s−1), as shown by the nearly overlapping empty symbols in Fig. 4a. By contrast, the elastic modulus varies in a wide range from ∼2 mPa to 100 mPa at 0.1 rad s−1, as shown by the filled symbols on the left of the Fig. 4a. Specifically, the first simulant, a highly viscous liquid, Alg0.5PEO0.41M, exhibits G′ more than 10 times lower than G″ at all probing frequencies, with moduli increasing in a similar manner with frequency via a power law (triangles, Fig. 4a). The second simulant, an elastic fluid mimicking CF-like mucus, Alg0.8PEO0.291M, exhibits G′ greater than G″ over the entire frequency range (0.1–100 rad s−1) (squares, Fig. 4a). The remaining two simulants, mimicking normal mucus, Alg1.0PEO0.5300k and Alg0.5PEO1.1100k, have different compositions but exhibit nearly identical viscoelastic behavior (circles and diamonds, Fig. 4a). Note that the Alg–PEO system is not a gel or near gel point as there are no crosslinks. Instead, it is simply a mixture of two polymers in buffer. The system is not a perfect replacement for mucus rheology but allows for dissecting roles of elastic and viscous moduli in bacteria transport in complex fluids.
In the mucus simulant with the lowest elasticity (Alg0.5PEO0.41M), the bacteria primarily exhibits rapid circular motion, as shown by the representative trajectories in Fig. 4b(i) and Video S12; this behavior is similar to that observed in low viscosity, Newtonian LB buffer (Fig. 3a(i)). As expected, in the highly elastic mucus simulant (Alg0.8PEO0.291M), most bacteria are confined locally, with a displacement less than twice the bacterium's body size (2 µm) within the field of view (Fig. 4b(iv)), as shown by Video S13. These differences are further confirmed by the more than 10-fold difference in the average MSD of P. aeruginosa, as indicated by the thick red and black lines in Fig. 4c.
In the mucus simulant with intermediate elasticity (Alg1.0PEO0.5300k), P. aeruginosa primarily exhibits linear, directional motion (Fig. 4b(ii)), as shown in Video S14. Interestingly, in another mucus simulant (Alg0.5PEO1.1100k) with a different polymer composition but nearly the same intermediate elasticity, most bacteria exhibit linear, directional motion (Fig. 4b(iii) and Video S15). Quantitatively, the average MSD for the bacteria in these two mucus simulants is nearly identical, as shown by the thick green and blue lines in Fig. 4c. These results demonstrate that the bacteria transport is determined by the flow properties, rather than the composition of the complex fluids, and that elasticity plays a critical role in facilitating the directional transport of P. aeruginosa.
We find that bacteria exhibit no circular motion regardless of viscosity, but their transport speed decreases dramatically in mucus simulants with higher viscosity (Fig. 5b). Specifically, in the simulant with the highest viscosity (Alg1.5PEO3300k), the bacteria are locally confined (Fig. 5b(iii) and Video S16), with an MSD less than 1 µm2 within 50 s (thick green line, Fig. 5c). In the simulant with intermediate viscosity (Alg1.0PEO2.5100k), most bacteria exhibit long-range, directional motion, while ∼20% bacteria remain confined (Fig. 5b(ii) and Video S17). This bimodal motility is similar to that observed in both normal and pathological mucus (Fig. 3a(ii)–(iv)). However, the bacteria only move by their body size with an MSD of ∼1 µm2 within 1 s, much less than that in normal mucus (MSD ∼ 50 µm2 at 1 s). By contrast, in the mucus simulant with the lowest viscosity (Alg0.5PEO1.1100k), the bacteria exhibit markedly faster directional transport, with an MSD of 10 µm2 within 1 s (Fig. 5b(i) and Video S15). These results indicate that higher viscosity slows down bacterial transport speed but does not alter the type of motion (Fig. S8). Collectively, our findings suggest that the motion type of P. aeruginosa is primarily determined by the elasticity of complex fluids, rather than their viscosity.
In the context of mucus clearance, the observed increase in mucus elasticity at pathological concentrations (Fig. 2c) is consistent with recent biological discoveries and clinical observations. We previously discovered that cilia are beating in a frictionless gel21 rather than a conventionally thought low viscosity liquid.50 The gel is formed by membrane-spanning mucin-type glycoproteins51 and large, linear mucopolysaccharides52 densely grafted onto cilia, structurally reminiscent of the bottlebrush for cleaning lab glassware but on a molecular scale. This mucus gel-on-brush model unifies the pathogeneses of mucus obstructive lung diseases, in which concentrated mucus generates an osmotic pressure that depletes water from the brush-like gel and thus physically collapses cilia.21 Moreover, by sampling nearly 1000 patients, subsequent clinical studies confirmed that mucus osmotic pressure is a biophysical marker of chronic bronchitis.3 In addition to elevated osmotic pressure, increased mucus elasticity may further impair mucus clearance, which requires mucus to flow like a liquid. The combination of the collapse of cilia and increased mucus elasticity results in mucus stasis, which is a hallmark of mucus obstructive lung diseases.
The dramatic difference between bacterial motility in normal and pathological mucus highlights the important roles of mucus in the formation of bacterial colonies. In normal mucus, P. aeruginosa are not confined but exhibit a rapid motion, with an average swimming speed 43.1 ± 1.4 µm s−1 comparable to that 44.5 ± 1.0 µm s−1 in LB medium. This behavior is somewhat consistent with previous findings that mucin biopolymers tend to promote the surface motility of P. aeruginosa, preventing the formation of biofilms.53,54 By contrast, in pathological mucus, P. aeruginosa are trapped and exhibit minimum displacement. This behavior is reminiscent of classical biofilm formation process, in which bacteria switch lifestyle from swarming to nonmotile upon adhering to a solid substrate.55 Yet, the major difference is that there is no solid substrate within the mucus gel. Thus, one possible explanation is that bacteria are physically trapped by the tight mesh of highly elastic pathological mucus hydrogel. Another possible explanation is that pathological mucus suppresses the expression of genes-encoded proteins, including fliC that encodes flagellin, involved in flagellum-mediated motility.56 Note that although the shut-off of flagellin is rapid, with 80% reduction of fliC mRNA within 2 hours of exposure to sputum from CF patients,56 this time scale is much longer than that in our experiments (<30 min). Moreover, P. aeruginosa may sense the extent of surface stiffness via retraction of type IV pili,57 which are important for P. aeruginosa virulence through type IV pili-mediated virulence pathways.58,59 It would be interesting to determine whether trapping P. aeruginosa within mucus hydrogel triggers the change of bacteria phenotype55 and induces the expression of virulence genes.60
An intriguing observation is that as a single flagellum bacterium, P. aeruginosa exhibits circular motion in a low viscosity, Newtonian LB buffer. This circular motion occurs in bulk liquid. By contrast, classical understanding is that bacteria swim in clockwise circular motion near a solid boundary.61 When a singly flagellated bacterium swims in a viscous liquid, its helical flagellum rotates. Simultaneously, to balance the torque generated by the flagellum rotation, the cell body rotates in the opposite direction. Near a solid surface, however, the viscous liquid closer to the boundary exerts more hydrodynamic drag on a moving object than the one further away. Thus, both the rotating cell body and flagellum experience a non-zero net lateral drag force near the solid boundary but along opposite directions. This generates a non-zero net torque that constantly alters the direction of bacterial swimming, resulting in circular motion of bacteria near an interface. The boundary effects on bacterial motion become amplified at small bacteria-substrate distance (< 200 nm)56 but diminish as the distance is greater than 10 µm,62 approximately 10 times of bacterial body length. In our experiments, the bacteria-substrate distance is ∼50 µm (Fig. S2), and we have confirmed the circular motion through multiple independent measurements. Moreover, the unexpected circular motion occurs not only in the LB buffer but also in a highly viscous mucus simulant (Alg0.5PEO0.41M) (Fig. 4b(i)); this mucus simulant has a complex viscosity more than 40 times of water and exhibits G′ more than 10 times lower than G″ across the entire probing frequency range from 0.1 to 100 rad s−1 (triangles, Fig. 4a). The difference is that the average diameter of the circular trajectories is 8.6 ± 0.4 µm in the mucus simulant (Fig. S10a); this value is significantly lower than 17.9 ± 0.5 µm in LB medium (Fig. S10b). Moreover, the observed diameter in the bulk LB medium is slightly lower than the lower end for the distribution of diameter for E. coli near interfaces (20–100 µm).61–64 Since single-flagellated bacterium can turn by exploiting bulking of its hook connecting the flagellum filament and the cell body,65 quantifying the axis misalignment between flagellum and cell body might provide insights into the mechanism of circular motion. Nevertheless, our findings lead to an open question on the mechanisms of circular motion of single-flagellated bacterium in bulk viscous liquids.
The most interesting, perhaps striking, finding is that elasticity promotes the directional, linear motion of P. aeruginosa in highly viscoelastic normal mucus and complex fluids. This conclusion is based on manually counting all bacterial trajectories, as no reliable algorithm exists to automatically classify transport modes. An alternative approach to assess directionality is to introduce a “straightness” parameter, defined as the ratio of end-to-end displacement to the total path length or the sum of each step between frames. A value approaching 1 indicates highly directional motion. Although this metric may underestimate the fraction of linear trajectories (e.g., back-and-forth linear motion and half circles), the results are qualitatively consistent with manual counts (Fig. S11 and S12).
Although it has yet to be elucidated the biological mechanism of elasticity-enhanced bacterial motility, our discovery has far-reaching implications in bacterial motility in complex fluids. Decades of research have demonstrated that viscoelasticity plays a critical role in bacterial motility in complex fluids.66–69 For instance, it was found that Helicobacter pylori, a bacterium that lives in stomach mucus, produces chemicals to elevate the pH of mucin gel; this reduces the viscosity of its local environment and, therefore, allows bacterial motility in porcine gastric mucin solutions.70 In synthetic high MW polymer solutions, by measuring the average speed of flagellated bacterial species including P. aeruginosa, it was found that bacteria exhibit maximum swimming velocity in solutions of ∼2 mPa s (about twice of water viscosity) and becomes immobilized in solution of high viscosity (>60 mPa s). However, this widely accepted view was challenged by a recent study, which shows that there is no such non-monotonic dependence of bacteria motility on solution viscosity.66 It was proposed that motion of flagellated bacteria is primary due to the fast-rotating flagella, which experience a lower viscosity than the cell body because of local shear-thinning of polymer solutions.66 In colloidal suspensions, the hydrodynamic interaction between individual bacterium and the suspended microparticles reduces bacterial wobbling, which in turn enhances bacteria motility.71 Nevertheless, in these complex fluids, the viscous and elastic moduli are intrinsically coupled. By contrast, our mucus simulants are composed of low and high MW linear polymers that can form reversible hydrogen bonds, enabling truly decoupled viscous and elastic moduli. These mucus simulants may provide a model system for probing the challenging physics of bacterial motility in non-Newtonian fluids.
In summary, we have studied the motility of P. aeruginosa in normal and pathological native human airway mucus. In the non-Newtonian, highly viscoelastic normal mucus, the bacteria primarily exhibit a directional, linear motion with a speed comparable to that in a Newtonian, low-viscosity physiological buffer. By contrast, elastic, concentrated pathological mucus traps bacteria, reducing their motility by more than 10-fold. By engineering mucus simulants with decoupled viscosity and elasticity, we discover that elasticity, rather than viscosity, determines the type of bacterial transport. Slightly more elastic fluids induce a transition in bacterial motility from primarily circular, non-directional to linear, directional motion. By contrast, increasing viscosity slows bacterial transport speed but does not change their motion type. We note that our studies are restricted to the transport of individual bacterium in 2D space. Resolving detailed motion of flagellum72,73 and cell body in three-dimensional (3D) space74–76 may provide additional insights into bacterial transport in mucus. Additionally, our mucus simulants are composed of simple linear polymers. However, mucins are a kind of bottlebrush biopolymer, featuring a large polypeptide backbone that is heavily glycosylated with many sugar chains.51,77,78 It would be interesting to use bottlebrush polymer solutions as mucus simulants to explore the roles of bottlebrush molecular architecture on bacteria transport.79–81 In the context of clinical relevance, it would be important to explore how bacteria/mucus as a composite gel impacts the efficiency of mucociliary clearance.21,82,83 In the context of soft matter physics, bacteria as an active matter often exhibit emergent behavior as a collective.84–89 It would be worthwhile to explore the roles of elastic modulus on the collective behavior of bacteria in complex fluids. Nevertheless, our results collectively show that elasticity promotes directional transport of P. aeruginosa in native human airway mucus and complex fluids. This discovery not only provides new insights into the roles of mucus in bacterial infection and mucosal defense but also opens new research directions in active matter in complex fluids.74,89–91
Footnote |
| † This article is dedicated to Dr Rubinstein on the occasion of his 70th birthday. |
| This journal is © The Royal Society of Chemistry 2026 |