Open Access Article
Ricardo Flores-Cruz,
Nitzya Ruiz-Robledo,
Adriana Romo-Pérez and
Arturo Jiménez-Sánchez
*
Instituto de Química, Universidad Nacional Autónoma de México, Ciudad Universitaria, Coyoacán 04510, Mexico City, Mexico. E-mail: arturo.jimenez@iquimica.unam.mx
First published on 14th May 2026
Hydrogen peroxide (H2O2) plays a central role in oxidative stress, signaling, and pathophysiology, yet its highly dynamic and compartmentalized distribution in living cells makes precise monitoring a major analytical challenge. Here, we present LysoH2O2, a naphthalimide-derived fluorescent probe specifically designed for lysosomal H2O2 detection and imaging. The probe exploits a selective transformation of an amine group into a hydroxylamine moiety upon reaction with H2O2, leading to a pronounced fluorescence enhancement. This molecular design integrates a lysosome-targeting unit to ensure subcellular specificity, enabling real-time visualization of H2O2 fluctuations in the lysosomal microenvironment. Confocal fluorescence microscopy demonstrates the ability of LysoH2O2 to track endogenous and exogenous H2O2 with high sensitivity and minimal cytotoxicity in living cells. Distinct from conventional boronate-based probes, LysoH2O2 employs a novel, biocompatible chemical transformation to achieve sensitive and selective monitoring of H2O2 within lysosomes.
Significant progress has been made in designing small-molecule fluorescent probes for H2O2, with many recent efforts focusing on organelle specificity. A number of effective designs target mitochondria, capitalizing on its membrane potential, and others have been engineered for lysosomes by incorporating pH-sensitive targeting groups like morpholine.11–19 Despite these advances, the chemical mechanisms underpinning most H2O2 probes remain limited. The vast majority rely on the boronate ester recognition unit, which undergoes H2O2-mediated cleavage to reveal a fluorophore.11,20 Moreover, most existing probes rely on the common boronate ester motif, which reacts with H2O2 to produce the corresponding phenol (or in some cases boric acid diester) alongside quinone byproducts, species known to exhibit cytotoxicity.21 In contrast, our work introduces a lysosome-targeted probe that, for the first time, undergoes a direct chemical transformation from an amine to a hydroxylamine (azanol) derivative within the same fluorophore scaffold, without generating harmful byproducts. A detailed reaction mechanism scheme is shown in Fig. S10, SI.22–24 This novel reaction not only ensures biocompatibility but also expands the toolkit for selective monitoring of H2O2.
This work introduces LysoH2O2, a fluorescent probe that overcomes limitations of conventional boronate-based designs. It introduces a first-in-class, biocompatible recognition mechanism where H2O2 directly converts an aromatic amine to a stable hydroxylamine within the naphthalimide scaffold,25 avoiding cytotoxic byproducts. This transformation is uniquely stabilized by the acidic lysosomal environment, preventing overoxidation.26 By integrating this novel chemistry with lysosomal targeting, LysoH2O2 enables specific, high-fidelity imaging of redox dynamics in this organelle, Fig. 1.
000 cells per well and allowed to adhere for 24 hours in MEM Alpha medium containing 10% FBS. Prior to treatment, the cell culture medium was replaced with serum-free MEM Alpha. The cells were then incubated with LysoH2O2 probe at specified concentrations (1–5 µM) for varying durations, as detailed for individual experiments. For colocalization studies, LysoTracker™ Deep Red (Thermo Fisher, 50 nM) was applied to the cells for 10 minutes before the addition of LysoH2O2, following the manufacturer's protocol. To monitor cellular blebs, a separate set of cells was stained with 1 µM AztecBlebTxR27 for 30 minutes. Following all staining procedures, cells were rinsed twice with pre-warmed, serum-free MEM Alpha before imaging.
Confocal microscopy was performed using either an inverted Zeiss LSM 880 or a Nikon A1R microscope, both equipped with on-stage environmental chambers to maintain conditions at 37 °C and 5% CO2 throughout the imaging sessions. To mitigate potential laser-induced artefacts and autofluorescence, laser power was minimized to 0.05 mW, and background signals from untreated control cells were recorded and digitally subtracted from experimental images. For time-course experiments, cells within the microscope chamber were imaged at 5 minute intervals over a period of up to 4 hours. Fluorescence images were acquired using consistent settings for all samples within a given experiment. Co-staining protocols were employed to validate the subcellular localization of the probe. For quantitative analysis, regions of interest (ROIs) corresponding to individual lysosomes were manually delineated in at least 40 cells per condition using the freehand selection tools in Fiji/ImageJ software. Data from three independent biological replicates were pooled, and results are expressed as the mean ± standard error of the mean (s.e.m.). Statistical analyses were performed using GraphPad Prism software to assess the significance of observed differences.
:
1 v/v) was stirred at 80 °C for 4 hours. Upon completion, the mixture was poured into ice-cold water (10 mL) to induce precipitation. The resulting solid was collected by filtration and subsequently dissolved in anhydrous DMF (20 mL). To this solution, aqueous sodium hydrosulfide (NaSH, 4 mmol, 0.224 g in 2 mL H2O) was added, and the reaction was stirred at 90 °C for 1 hour. The mixture was then quenched with ice water and acidified to weak acidity, yielding a precipitate that was isolated via filtration. This intermediate was combined with 4-(2-aminoethyl)morpholine (1.3 mmol, 0.75 mL) in DMF (10 mL) and heated to 120 °C for 8 hours under an argon atmosphere with vigorous stirring. After cooling to room temperature, the crude product was taken up in acetone (∼25 mL) and purified by flash column chromatography over silica gel, using a gradient of dichloromethane and methanol (95
:
5) as the eluent. LysoH2O2 was obtained as a yellow solid in a 67% yield (0.225 g). 1H NMR (300 MHz, CDCl3) δ: 8.61 (dd, J = 26.60 Hz, 1H), 8.42 (dd, J = 12.87 Hz, 1H), 8.12 (dd, J = 21.45 Hz, 1H), 7.68 (m, J = 22.32 Hz, 1H), 6.90 (d, J = 13.73 Hz, 1H), 4.97 (s, 2H), 4.34 (t, J = 21.45 Hz, 2H), 3.71 (m, J = 21.45 Hz, 4H), 2.72 (t, J = 26.60 Hz, 2H), 2.63 (s, 4H). 13C NMR (75 MHz, CDCl3) δ: 154.2, 147.1, 133.7, 129.3, 127.2, 124.8, 122.1, 119.5, 117.21, 109.4, 107.81, 67.25, 57.16, 55.18, 36.41. HRMS (ESI+) m/z: calculated for C18H20N3O3 [M + H]+: 326.14. Found: 326.1498.
The 1H NMR spectrum of the hydroxylamine product (Fig. S5) displays two characteristic exchangeable singlets in the downfield region. The broader signal at δ 10.15 ppm is attributed to the –OH proton, whose increased linewidth reflects the faster exchange kinetics typical of hydroxyl protons; D2O addition caused preferential attenuation of this signal over the δ 11.05 –NH– resonance, further supporting this assignment (data not shown). The more downfield signal at δ 11.05 ppm is assigned to the –NH– proton, whose exceptional deshielding is attributed to intramolecular hydrogen bonding between the N–H and the flanking carbonyl oxygens of the naphthalimide scaffold, consistent with literature values for related arylhydroxylamines.26 The stability of this product is strongly pH-dependent: under mildly acidic conditions mimicking the lysosomal environment (pH 4.22, 5 mM HTAB), the hydroxylamine signal remains stable over time, as confirmed by the time-course fluorescence profiles in Fig. 2A. In contrast, at physiological pH (7.42), the free-base form of the hydroxylamine undergoes progressive overoxidation to the nitro derivative with concomitant fluorescence quenching, consistent with the acid-stabilization mechanism described in Fig. 2B.
The excitation and emission spectral profiles of LysoH2O2 before and after H2O2 activation at pH 4.22 and pH 7.42 are presented in Fig. S11 (SI), illustrating the pronounced fluorescence enhancement at lysosomal pH and the contrasting signal quenching at neutral pH due to overoxidation.
Quantitative photophysical characterization in 5 mM HTAB micellar medium at pH 4.22 revealed a molar extinction coefficient of ε = 6550 M−1 cm−1 and a fluorescence quantum yield of Φ = 0.008 for LysoH2O2, increasing to ε = 6890 M−1 cm−1 and Φ = 0.21 for the hydroxylamine product upon H2O2 activation, corresponding to a 26.3-fold fluorescence enhancement consistent with the PeT inhibition mechanism (Table S1, SI). Initially, the probe exhibits a weak fluorescence signal at 550 nm; however, upon exposure to H2O2, a marked enhancement of fluorescence intensity is observed at this wavelength. This activation arises from the inhibition of the photoinduced electron transfer (PeT) process from the amino group to the naphthalimide fluorophore following its oxidative transformation. To further support the PeT-based turn-on mechanism, a frontier orbital energy alignment diagram was constructed comparing LysoH2O2 and its hydroxylamine product at the PBE/6-31G(d,p) level of theory (Fig. S12, SI). NBO analysis confirms significant nitrogen lone pair character in the HOMO of the intact probe (HOMO = −5.85 eV), consistent with an active donor-to-acceptor PeT process that quenches fluorescence. Upon oxidation to the hydroxylamine, the lone pair contribution to the HOMO is markedly reduced (HOMO = −5.92 eV) and the HOMO–LUMO gap widens from 2.25 to 2.41 eV (ΔΔE = +0.16 eV), confirming that oxidation lowers the donor orbital energy, suppresses PeT, and restores fluorescence emission.
Such a PeT-based mechanism has been well-documented for related naphthalimide systems and rationalizes the observed fluorescence “turn-on” behavior, Fig. 2. Notably, the probe selectively responds to H2O2, as no significant fluorescence activation occurs with other biologically relevant reactive oxygen species (ROS) tested, including HOCl, ONOO−, ˙OH, 1O2, and O2˙−. Instead, only radical species induced partial quenching of fluorescence, which is chemically anticipated if radical additions interact with the probe. Importantly, this quenching does not significantly interfere with the desired in vitro monitoring of H2O2, as shown in Fig. 3.
Once maximum fluorescence emission is attained through the formation of the hydroxylamine intermediate, the signal remains stable under conditions mimicking the lysosomal environment, specifically in 5 mM HTAB micellar medium at pH 4.22. This stability represents a crucial finding, as it confirms that under mildly acidic conditions the hydroxylamine species is preserved, thereby preventing further oxidation and maintaining a consistent fluorescent response. In contrast, when the probe is incubated in pure aqueous media at physiological pH (7.42), overoxidation occurs, leading to the formation of the corresponding nitro derivative and a complete loss of fluorescence. Extended time-course experiments comparing the fluorescence stability of the activated probe at pH 4.22 and pH 7.42 (Fig. S6, SI) revealed a striking contrast: at lysosomal pH, a stable plateau lasting ∼44 minutes precedes a slow pseudo-first-order decay (kobs = 0.0076 min−1, t1/2 = 91 min, R2 = 0.996), with 70.2% of the maximum signal retained at 90 minutes. At neutral pH, overoxidation follows sigmoidal kinetics with a 4.4-fold higher decay rate constant, resulting in near-complete signal quenching (99.4% loss) within the same timeframe. These kinetic data quantitatively establish both the robust stability of the hydroxylamine product under lysosomal conditions and the efficiency of the acid-protection mechanism. This pronounced difference highlights the protective role of the acidic lysosomal environment in stabilizing the fluorescent product and sustaining signal intensity, underscoring the importance of local environmental factors in modulating the probe photophysical response. Importantly, the oxidized product of the hydroxylamine derivative was chemically characterized by ESI-HRMS and 1H NMR spectroscopy, confirming the presence of the –NH–OH functional group, Fig. S7–S9, SI file.
These features make LysoH2O2 highly adaptable for incorporation into subcellular targeting groups with enhanced selectivity and imaging depth. The probe design successfully leverages the unique lysosomal pH to gate the oxidation reaction, providing a selective and stable response to H2O2 while avoiding the signal loss associated with overoxidation in neutral environments.
Confocal microscopy imaging validated the successful lysosomal targeting of LysoH2O2. While the probe's green channel fluorescence was faint under standard settings, we achieved robust signal detection in the blue channel (DAPI, λexc = 440 nm, λem = 480–500 nm) by optimizing laser power and detector gain. Under these conditions, LysoH2O2 efficiently entered SK-Lu-1 cells and accumulated in discrete cytoplasmic structures, producing a bright, punctate staining pattern characteristic of lysosomes.
To definitively confirm this subcellular localization, we performed co-staining experiments with the established lysosomal marker, LysoTracker™ Deep Red. The resulting fluorescence images showed a striking overlap between the blue signal from LysoH2O2 and the red signal from LysoTracker (Fig. 4). This visual correlation was strongly supported by quantitative analysis, which yielded a high Pearson's coefficient of 0.935. Further confirmation came from the van Steensel's cross-correlation function (CCF), which displayed a pronounced peak near zero, indicating tight spatial registration of the two signals. Together, these data provide conclusive evidence that the morpholine unit effectively guides LysoH2O2 to the acidic lysosomal environment, fulfilling the essential requirement of subcellular specificity for subsequent H2O2 sensing applications.
We next challenged the probe with physiologically relevant H2O2 stimuli. Treatment of cells with a bolus of exogenous H2O2 (200 µM) resulted in a rapid and marked activation with an optimal emission in the green fluorescence channel (λexc = 488 nm, λem = 530–550 nm), confirming the ability of the probe to respond to elevated peroxide levels within the cellular context while maintaining a stable fluorescence signal for at least 30 minutes (Fig. 5A). The switch from blue to green channel detection upon H2O2 stimulation directly reflects PeT inhibition: the intact probe exhibits residual emission in the blue channel (λexc = 440 nm, λem = 480–500 nm), while the hydroxylamine product displays a red-shifted, strongly enhanced emission optimally detected in the green channel (λexc = 488 nm, λem = 510–550 nm).
More significantly, stimulation with phorbol 12-myristate 13-acetate (PMA), a known inducer of endogenous H2O2 production primarily via the NADPH oxidase (NOX) system,28 elicited a comparable fluorescent “turn-on” response within lysosomal puncta (Fig. 5B). Interestingly, endogenous ROS production induced by PMA also generated a subtle signal in the green channel at mitochondrial locations (Fig. 5B, yellow arrowheads), which was absent upon direct exogenous H2O2 addition (Fig. 5A). Several explanations may account for this observation: (i) passive diffusion of NOX-derived H2O2 from its site of production to neighboring mitochondria; (ii) a minor fraction of the probe residing in mitochondria, rendering it sensitive to locally generated ROS; or (iii) interorganelle ROS communication downstream of NOX activation. Distinguishing between these possibilities will require further investigation using, for example, mitochondria-specific ROS scavengers or dual-organelle co-imaging strategies, and represents a compelling direction for future work.
A key aspect of the LysoH2O2 probe performance is its specific response to H2O2 amidst the complex redox landscape of the lysosome. While other reactive species, such as the hydroxyl radical (˙OH), may be present and could potentially quench the formed fluorophore, it is crucial to note that these species do not initiate the fluorescence turn-on. The activation mechanism is specifically gated by the H2O2-mediated oxidation of the hydroxylamine, a reaction that other ROS/RNS do not trigger under these conditions. Therefore, the observed fluorescence enhancement can be confidently attributed to H2O2, establishing the probe high operational specificity in a live-cell setting.
The differential response observed between exogenous H2O2 addition and endogenous PMA stimulation is particularly revealing. The appearance of a mitochondrial signal specifically during endogenous ROS production suggests that the native signaling networks of the cells are being activated. PMA-induced NOX activity likely creates a localized redox signal that is propagated to the mitochondria, potentially as part of a coordinated interorganelle communication event, such as redox relay or calcium signaling. This phenomenon would be entirely masked by the direct application of exogenous H2O2. The ability of LysoH2O2 to capture this nuanced difference underscores its unique value; it is not merely a passive reporter of H2O2 concentration, but an active tool for visualizing compartment-specific ROS signaling cascades in real time. This positions LysoH2O2 to investigate fundamental questions about how redox signals are generated, contained, and transmitted between organelles.
Finally, to demonstrate the probe practical utility in cell biology, we employed LysoH2O2 to monitor H2O2 dynamics during autophagy in SK-Lu-1 cells. Autophagy was induced using both starvation (HBSS buffer) and the chemical agent rapamycin.29,30 Time-lapse confocal microscopy revealed that autophagy induction led to a clear increase in H2O2-specific fluorescence within newly formed fluorescent puncta, consistent with autophagic vesicles such as autophagosomes and autolysosomes (Fig. 6). We note that the molecular identity of these structures as bona fide autophagosomes was not confirmed by co-labeling with autophagosome-specific markers (e.g., LC3); their characterization as autophagic vesicles is based on their morphology, their dynamic lysosomal fusion and fission behaviors, and the well-established association between starvation-induced autophagy and lysosomal ROS generation.29 Co-immunofluorescence confirmation using LC3 reporters is planned for future work. Then, the dynamic interactions between lysosomes during the autophagy process were visualized with the Lyso-H2O2 probe. As shown in Fig. 6, confocal time-lapse imaging of cells incubated in serum-free medium revealed a sequence of lysosomal fusion and fission events over 4 minutes time-lapse recordings. In Fig. 6a, two lysosomes were observed undergoing a characteristic “kiss-and-transfer” event, in which they gradually approached, transiently interacted to exchange content, and then separated. In Fig. 6b, a partial fusion event was captured, where the lysosomes established a stable contact zone without complete merging. Fig. 6c depicts a full fusion event, where two lysosomes completely merged into a single organelle while maintaining independent motility relative to surrounding structures. Finally, in Fig. 6d, we documented a rare dissociation event, in which a fused lysosome pair progressively separated until complete disengagement and spatial separation were achieved. This result successfully captures a dynamic, physiologically relevant increase in lysosomal H2O2 flux, underscoring the probe sensitivity and its potential to uncover the role of reactive oxygen species in fundamental cellular processes. However, the present study does not include a pharmacological negative control using autophagy inhibitors (e.g., bafilomycin A1 or 3-methyladenine), which would formally exclude a general stress response as the origin of the observed fluorescence enhancement. This important control is proposed as a priority for future work employing LysoH2O2 in autophagy-related investigations.
More broadly, Lyso-H2O2 addresses a significant methodological gap in redox biology by shifting the focus from the extensively studied mitochondria to the critically important, yet less explored, lysosomal compartment. This tool provides a new chemical means to challenge the prevailing mitochondrial-centric view of cellular oxidative signaling. We anticipate that Lyso-H2O2 will serve as a foundational tool for future investigations, enabling multiplexed assays that simultaneously monitor ROS across different organelles. Such approaches are crucial for deciphering the complex landscape of interorganelle redox communication and its profound implications for cellular physiology and disease mechanisms.
| This journal is © The Royal Society of Chemistry 2026 |