Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Enhanced production of dimethyl carbonate from the alternating polarity electrolysis of methanol and carbon dioxide
Momoko Ishiiab,
Maria M. Paulsenac,
Remi A. Mellinghoffab,
Heather O. LeClercab,
Ho Yin Tsea,
Hanno C. Erythropelab,
Julie B. Zimmermanab,
Paul T. Anastas*ad and
Darren S. Lee*ae
aCenter for Green Chemistry & Green Engineering, School of the Environment, Yale University, New Haven, CT 06511, USA. E-mail: darren.lee@ntu.ac.uk; paul.anastas@yale.edu
bDepartment of Chemical and Environmental Engineering, Yale University, New Haven, CT 06511, USA
cDepartment of Energy, Aalborg University, 9220 Aalborg Øst, Denmark
dSchool of Public Health, Yale School of Medicine, New Haven, CT 06511, USA
eSchool of Science & Technology, Nottingham Trent University, Clifton Lane, Nottingham, NG11 8NS, UK
First published on 17th March 2026
Abstract
Correction for ‘Enhanced production of dimethyl carbonate from the alternating polarity electrolysis of methanol and carbon dioxide’ by Momoko Ishii et al., Green Chem., 2025, 27, 14513–14521, https://doi.org/10.1039/D5GC02358K.
The authors regret that the image presented as Fig. 6c was a duplicate of Fig. 6a. The corrected Fig. 6 is provided below.
 | ||
| Fig. 6 Yield of dimethyl carbonate (DMC), formaldehyde (FA), and methyl formate (MF) after a reaction using 500 s alternating polarity (a) at various voltages after 4 h and (b) sampled at various times using 5 V; (c) productivity of DMC, FA, and MF under same conditions as in (b); (d) yield of DMC, FA and MF under different control conditions using, unless otherwise indicated, 5 V and 500 s polarity switching and a 4 h reaction time. Surface area of the μGC electrodes reduced by approx. 58% assuming no porosity (regular GC: 52.5 mm × 8 mm × 2 mm vs. μGC: 56 mm × 3 mm × 1 mm). Error bars representing ± one standard deviation. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2026 |