Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Rapid single step atmospheric pressure plasma jet deposition of a SERS active surface
Oliver S. J.
Hagger
a,
M. Emre
Sener
a,
Imran
Khan
b,
Francis Lockwood
Estrin
a,
Stefanos
Agrotis
a,
Albertus D.
Handoko
c,
Ivan P.
Parkin
a and
Daren J.
Caruana
*a
aDepartment of Chemistry, Christopher Ingold Laboratories, 20 Gordon St., WC1H 0AJ, London, UK. E-mail: d.j.caruana@ucl.ac.uk
bDefence Science and Technology Laboratory (Dstl), Porton Down, Salisbury, Wiltshire SP4 0JQ, UK
cInstitute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore, Singapore
First published on 27th September 2023
Abstract
Correction for ‘Rapid single step atmospheric pressure plasma jet deposition of a SERS active surface’ by Oliver S. J. Hagger et al., Mater. Adv., 2023, 4, 3239–3245, https://doi.org/10.1039/D3MA00249G.
The authors regret that in the Results and discussion section, the particle sizes for PSNP and PDS particles were given in reversed order. The correct particle sizes should be as follows:
On average, through analysis of SEM images, PSNP and PDS particles are 51 ± 24 nm, and 42 ± 12 nm in size, respectively, whereas the commercial substrates OI and SS are 242 ± 58 nm and 133 ± 32 nm in size.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2023 |