Open Access Article
Ross W.
Cheloha‡
*a,
Fabian A.
Fischer§
a,
Thomas J.
Gardella
b and
Hidde L.
Ploegh
*a
aProgram in Cellular and Molecular Medicine, Boston Children's Hospital, 1 Blackfan Circle, Boston, MA 02115, USA. E-mail: ross.cheloha@nih.gov; hidde.ploegh@childrens.harvard.edu
bMassachusetts General Hospital and Harvard Medical School, 50 Blossom Street, Boston, MA 02114, USA
First published on 11th October 2021
Antibodies raised against many cell surface proteins, including G protein-coupled receptors, remain important tools for their functional characterization. By linking antibodies to ligands for cell surface proteins, such adducts can be targeted to the surface of a cell type of choice. Site-specific functionalization of full-size antibodies with synthetic moieties remains challenging. Here we present new approaches in which single domain antibodies (known as VHHs or nanobodies) that target either cell surface proteins or conventional antibodies are used to indirectly deliver ligands for GPCRs to their sites of action. The combination of high yield production of nanobodies, facile site-specific functionalization, and compatibility with commercially available mouse and rabbit antibodies should enable wide application of this approach.
The use of single domain antibodies (VHHs or nanobodies) can overcome some of these complications.7 Nanobodies are the recombinantly expressed variable regions of camelid heavy chain only antibodies. They are the smallest antibody fragments that retain the capacity to bind antigen. Because nanobodies do not require pairing with the light chain through disulfide linkage, they can be expressed recombinantly in bacteria in high yield. Sortase-mediated labeling offers a straightforward method for site-specifically labeling recombinant proteins, including nanobodies.8 Nanobodies have been applied in a variety of settings, including as imaging agents in immuno-positron emission tomography,9 as crystallization chaperones,10 and as inhibitors or agonists of cell surface receptor signaling.11–14 The first nanobody-based therapeutic has now been approved for clinical application.15
Nanobody conjugates have also been used to deliver bioactive compounds to specific cell types. A nanobody was applied as a conventional ADC to deliver a cytotoxic compound to kill murine lymphoma cells in vitro and in mice.16 In an example of targeting cell surface proteins,17 a conjugate between a green fluorescent protein (GFP)-specific nanobody and a photo-switchable agonist for the metabolic glutamate receptor enabled light-mediated activation of receptor signaling, but required the use of an engineered receptor-GFP fusion.14 A variant of glucagon-like peptide-1 (GLP1) was fused to a GLP1-receptor-specific nanobody to provide a conjugate with activity in mice.18 We showed that the conjugation of weakly active fragments of parathyroid hormone (PTH) to nanobodies that bound the receptor or that recognized epitope tags incorporated into type-1 PTH-receptor (PTHR1) augmented the biological activity and receptor specificity of these otherwise suboptimal fragments.2 This approach was dubbed “conjugation of ligands and antibody for membrane protein”, or CLAMP. One of these CLAMPs induced a physiological response in mice, whereas the corresponding free peptide did not.2
These applications relied in large part on the use of target-specific nanobodies. While the pool of nanobodies continues to expand,19 there are many targets for which appropriately specific nanobodies are not available. Here we describe new approaches that rely on nanobodies for delivery of ligands for cell surface receptors independent of the availability of target-specific nanobodies.
Conventional antibodies were also used for staining cells for flow cytometry as described above, with the following exceptions. In one staining method, primary antibodies (IgGs) were incubated with cells at the indicated concentrations in the presence of a 3 fold molar excess of secondary (anti-IgG) nanobodies site-specifically conjugated with biotin. Biotin was detected with streptavidin–PE as described above. In an alternative method, cells were stained with unlabeled primary antibodies and detected following secondary staining, using commercial secondary anti-IgG antibodies conjugated with Alexafluor647 (ThermoFisher, A-21235). Data were analyzed using FlowJo version 7.6. The median fluorescence intensity (MFI) of stained cells was used to generate VHH binding dose response curves.
000 g mol−1. VHH–PTH1–11 conjugates were premixed with indicated IgGs at a 3
:
1 molar ratio and incubated for at least 10 minutes at room temperature prior to addition to cells expressing PTHR1 or variants.
000 cells per well) to a 96 well plate containing HEK293 cells expressing PTHR1 and cAMP Glosensor as described above. Luminescence readouts at time points prior to 10 minutes after addition of A20 cells were unreliable, so luminescence was measured between 12–16 minutes after addition of the A20 cells.
![]() | ||
| Fig. 1 Schematic of methods for receptor activation using ligand-nanobody fusions with PTHR1 as an example. (a) Direct tethering of ligand to its target with a VHH as previously described.2 (b) Indirect targeting using a VHH that binds another protein (MHC-I) on the cell surface. (c) Antibody-mediated direct tethering using a receptor-specific (or fusion protein-specific) full-size antibody (IgG) and a VHH that binds IgG. (d) Antibody-mediated indirect tethering using a full-size antibody that binds another protein (MHC-I) on the cell surface and a VHH that binds IgG. | ||
We used a cell-based system in which human PTHR1 or its variants are stably expressed in HEK293 cells as a test bed for alternative tethering strategies. In the first iteration, VHHs that target cell surface proteins naturally expressed on HEK293 cells were prepared and evaluated (Fig. 1b). We used VHHs that target human β2-microglobulin, the light chain of cell surface Class I major histocompatibility complex products (VHHMHC-I, previously named Nb30),20 the integrin α5β1 (VHHα5β1), and a short peptide epitope taken from the intracellular protein UBC6E (VHH6E).22 These VHHs were labeled at their C-terminus by means of sortagging with a peptide functionalized with biotin for detection and with an azide for conjugation to appropriately functionalized peptides of choice (Fig. 2a).2 Conjugates comprised of VHHs, biotin, and PTH1–11 were used to label HEK293 cells, followed by detection with a streptavidin–phycoerythrin conjugate (Fig. 2b–d). The HEK293 cell line (PTHR1-6E-HEK) expresses PTHR1 with the 6E tag inserted into a disordered portion of the receptor extracellular domain2 (Fig. 2b), whereas HEK293 serves as a negative control (neg-HEK) (Fig. 2c and d). VHHMHC-I and VHHα5β1 conjugates labeled PTHR1-6E-HEK and neg-HEK cells at low concentrations, indicating tight binding. VHHMHC-I labeling provided a higher maximal intensity of staining (approximately 10 fold) than VHHα5β1 (Table 1).29 Staining of PTHR1-6E-HEK cells with the VHH6E conjugate provided a stronger signal than staining with VHHMHC-I (Table 1), consistent with a high level of expression of PTHR1-6E on PTHR1-6E-HEK cells. We then evaluated whether the VHH–PTH conjugates shown to bind to PTHR1-6E-HEK cells stimulated receptor activation and the production of cyclic adenosine monophosphate (cAMP), a second messenger produced upon PTHR1 activation. Consistent with previous results, VHH6E–PTH1–11 potently stimulated cAMP responses on PTHR1-6E-HEK cells (Fig. 2e and Table 1).2 VHHMHC-I–PTH1–11 was essentially inactive in stimulating cAMP responses, whereas VHHα5β1–PTH1–11 induced a weak but detectable response. This observation was unexpected given that staining of HEK cell lines was stronger with VHHMHC-I than VHHα5β1. The origin of this difference is unknown, but it may relate to the larger size and expanded flexibility of the extracellular portions of α5β1 relative to β2-microglobulin as a more compact subunit of MHC-I. Another possibility is that PTHR1 may localize to membrane domains closer to α5β1 relative to the β2-microglobulin-MHC-I complex. In this context, the use of a longer flexible linker between the receptor agonist and nanobody may improve activation efficacy. A conjugate consisting of a nanobody and ligand that both target the same receptor was relatively insensitive to inclusion of a short polyethylene glycol linker.2 Collectively, VHH–PTH conjugates that directly target other proteins on the cell surface (MHC-I, α5β1) are only weak agonists of PTHR1.
![]() | ||
| Fig. 2 Synthesis and evaluation of PTH–nanobody conjugates. (a) Synthetic scheme for production of PTH–nanobody conjugates. PTH-peptide synthesis and functionalization, VHH production and functionalization, and conjugation was performed as described in methods. (b) Representative (one of three experiments) dose–response curve for binding of VHH–biotin–PTH conjugates to PTHR1-6E-HEK cells. The plots were produced by fitting a sigmoidal dose–response curve. Staining, detection, and quantitation were performed as described in methods. Representative data from one of three independent experiments is shown, with compiled data shown in Table 1. (c) Binding of VHH–biotin–PTH conjugates to neg-HEK cells with a zoomed inset (boxed region) shown in panel d. Representative data from one of three independent experiments is shown with compiled data shown in Table 1. (e) Representative dose–response assay for induction of cAMP responses in PTHR1-6E-HEK cells. Error bars correspond to standard deviation from replicate conditions in a single experiment. Plots were generated by fitting a sigmoidal dose–response curve. Representative data from one of three independent experiments is shown with compiled data shown in Table 1. | ||
| PTHR1-6E-HEK | Binding EC50 | Max. stain | ||
|---|---|---|---|---|
| nM | SD | Intensity (relative to MHC-I) | SD | |
| a The maximal staining for VHH6E–PTH1–11 on HEK-neg cells was very weak, so binding EC50 values were not determined (ND). | ||||
| VHH6E–PTH1–11 | 5.1 | 0.3 | 5.6 | 2.5 |
| VHHMHC-I–PTH1–11 | 3.2 | 1.2 | 1 | 0 |
| VHHa5b1–PTH1–11 | 4.6 | 3.3 | 0.11 | 0.04 |
| PTHR1-6E-HEK | Signaling cAMP EC50 | Max. cAMP signal | ||
|---|---|---|---|---|
| nM | SD | Normalized (fold over no ligand) | SD | |
| PTH1–34 | 0.18 | 0.090 | 120 | 23 |
| PTH1–11 | 132 | 51 | 150 | 17 |
| VHH6E–PTH1–11 | 0.71 | 0.64 | 104 | 17 |
| VHHMHC-I–PTH1–11 | >100 nM | 3.8 | 3.1 | |
| VHHa5b1–PTH1–11 | >100 nM | 33 | 29 | |
| Neg-HEK | Binding EC50 | Max. stain | ||
|---|---|---|---|---|
| nM | SD | Intensity (relative to MHC-I) | SD | |
| VHH6E–PTH1–11 | NDa | ND | 0.020 | 0.016 |
| VHHMHC-I–PTH1–11 | 4.3 | 1.7 | 1.0 | 0 |
| VHHa5b1–PTH1–11 | 3.0 | 2.8 | 0.10 | 0.05 |
:
1 molar ratio with mouse IgGs prior to addition to HEK293 cells and then recorded cAMP responses at VHHmIg–PTH1–11 doses of 100 nM and 10 nM (Fig. 3a and b). The combination of VHHmIg–PTH1–11 and α-GFP led to a robust cAMP response at 100 nM and a weak response at 10 nM, whereas the combination of VHHmIg–PTH1–11 and isotype was inactive. The combination of VHHmIg–PTH1–11 and α-GFP was more potent than PTH1–11 alone. In a separate experiment, we used versions of PTHR1 in which the extracellular portion of the receptor was absent or replaced with the HA-epitope tag (Fig. S2, ESI†).31 The combination of VHHmIg–PTH1–11 and α-HA mouse monoclonal IgG lead to a cAMP response that far exceeded the response seen with PTH1–11 alone, whereas the combination of VHHmIg–PTH1–11 and isotype mouse IgG was inactive. These data show that indirect targeting of PTHR1 using an Ig-specific nanobody–PTH conjugate and a bridging IgG (Fig. 1c) can augment the biological activity of a weakly active ligand.
![]() | ||
| Fig. 3 Assessment of tethered VHH–PTH conjugates in activating PTHR1 signaling. PTH peptides or conjugates prepared as described in Fig. 2a were either mixed with commercially available full-size antibodies or added directly to HEK293 cells that express PTHR1 or its variant as described in methods. Data sets were compared for statistically significant differences using one-way ANOVA with multiple comparisons; *p < 0.05. (a and b) HEK293 cells expressing a GFP-PTHR1 fusion protein (see Fig. S1, ESI†) were treated with PTH agonist peptides (columns 1 + 2) or VHH–PTH conjugates mixed with commercial antibodies (columns 3 + 4). PTH agonist peptides and VHH–PTH conjugates were applied at a dose of 100 nM (panel a) or 10 nM (panel b). VHH–PTH conjugates were used a 3 fold molar excess over commercial antibodies. ‘Isotype’ refers to a polyclonal mouse IgG preparation. The magnitude of the cAMP responses is normalized to that of PTH1–34. (c and d) Experiments were performed as in panels a and b, except that HEK293 cells expressed WT hPTHR1. Bars and error bars represent mean ± SD from 6 independent experiments. (e and f) HEK293 cells expressing WT hPTHR1 were treated with PTH agonist peptides (columns 1 + 2) or VHH–PTH conjugates mixed with commercial antibodies (columns 3–6). “Rb” indicates a monoclonal antibody derived from rabbit. “Ms” indicates monoclonal antibody derived from mouse. Isotype refers to a polyclonal IgG antibody preparation derived from WT mouse. Bars and error bars represent mean ± SD from 3 independent experiments. | ||
The ability to use antibodies to target proteins on the cell surface other than the receptor of interest (Fig. 1d) provides opportunities for the delivery of ligands to cell types of choice, based on the presence of an IgG-recognized surface marker. As a proof of concept, we deployed commercial antibodies that target β2-microglobulin (α-β2M) as a component of cell surface MHC-I, a ubiquitously expressed type I membrane protein. This also allowed a direct comparison with the use of a nanobody that targets β2-microglobulin (Fig. 1a and 2). Because we were targeting PTHR1 indirectly, we used a HEK293 cell line that stably expresses wild-type PTHR1. The combination of VHHmIg–PTH1–11 and mouse α-β2M induces a robust cAMP response at a concentrations of 100 nM whereas the combination of VHHmIg–PTH1–11 and a control antibody (“isotype”) was inactive (Fig. 3c and d). The use of a control nanobody–PTH conjugate that targets the 6E epitope tag (VHH6E–PTH1–11) in combination with α-β2M was also inactive. Neither the binding of IgG to PTHR1 nor the presence of an irrelevant VHH–PTH1–11 conjugate leads to activation. The combination of VHHmIg–PTH1–11 and α-β2M was more potent than PTH1–11 alone. Indirect targeting (as in Fig. 1d) can therefore substantially increase the biological activity of a weakly active ligand. This stands in sharp contrast to parallel efforts with conjugates that comprise nanobodies that target β2M, which failed to activate PTHR1 (Fig. 1b and 2). The cause of this divergence is unclear but may be related to the additional flexibility and/or distance provided by the bridging full-size antibody.
Any attempt to apply VHHmIg conjugates in mice would likely be stymied by the high concentration of mIgs found in the mouse blood stream. To circumvent this problem, we turned to a nanobody (previously23 named TP897, named here VHHrIg) that binds to rabbit Igs, but not mouse. We prepared a VHHrIg–PTH1–11 conjugate as described above and evaluated its performance in PTHR1 activation assays. VHHrIg–PTH1–11 activated PTHR1 signaling when combined with rabbit α-β2M but not mouse α-β2M (Fig. 3e and f). This finding offers a path towards using this approach in vivo in mice.
These findings raised the question whether targeting other cell surface proteins for antibody tethering would likewise facilitate receptor activation. We therefore expanded the approach described above by inclusion of monoclonal antibodies that target the cell surface markers CD63 and CD81, both widely expressed. CD63 and CD81 are members of the tetraspanin family of proteins, naturally expressed on HEK293 cells and on most other cell types, at modest levels.32,33 We confirmed by flow cytometry that these monoclonal antibodies bound to HEK293 cells (Fig. S3, ESI†). The α-CD63 and α-CD81 antibodies labeled HEK293 cells following secondary staining with either α-mouse Ig-alexafluor 647 or with VHHmIg–biotin and streptavidin–phycoerythrin (streptavidin–PE, Fig. S3, ESI†). However, neither of the α-CD63 and α-CD81 antibodies stained HEK293 cells as strongly as the anti β2M antibody, consistent with the high level of β2M found on most cells (Fig. S3, ESI†).29 We then tested whether the α-CD63 and α-CD81 antibodies could provide tethering to facilitate activation of PTHR1 signaling (Fig. 4). Whereas α-CD81 facilitated activation comparable to α-β2M at both concentrations tested, α-CD63 failed to promote activation above background levels. The source of this difference between the α-CD81 and α-CD63 antibodies in these assays is not clear, but it may be related to differences in target expression levels or differences in membrane protein localization.33 These findings open the door to identifying other cell surface markers, potentially expressed specifically on cell types of interest, that could allow cell-type specific activation of widely expressed receptors.
![]() | ||
| Fig. 4 Assessment of indirect activation efficiency through targeting varied surface proteins. PTH peptides or conjugates prepared as described in Fig. 2a were either mixed with commercially available antibodies or added directly to HEK293 cells expressing PTHR1 or its variant as described in methods. (a and b) HEK293 cells that express PTHR1 were treated with PTH agonist peptides (columns 1 + 2) or VHH–PTH conjugates mixed with commercial antibodies (columns 3–6). PTH agonist peptides and VHH–PTH conjugates were applied at a dose of 100 nM (panel a) or 10 nM (panel b). VHH–PTH conjugates were used at a 3 fold molar excess over commercial antibodies. ‘Isotype’ refers to a polyclonal mouse IgG preparation. The magnitude of the cAMP responses is normalized to that of PTH1–34. Bars and error bars represent mean ± SD from 3 independent experiments that are distinct from those shown in Fig. 3. Data sets were compared for statistically significant differences using one-way ANOVA with multiple comparisons; *p < 0.05. | ||
PTH1–34 can be conjugated to a nanobody with only a minor impact on PTHR1 agonist activity.2 We confirmed this: CLAMPs consisting of PTH1–34 were conjugated to VHHs that target either GFP34 (VHHGFP–PTH1–34) or MHC-II (VHHMHC-II–PTH1–34) using the chemistry described in Fig. 2a. These CLAMPs performed similarly to PTH1–34 itself in cAMP stimulation assays on HEK293 cells (receptor cells) that express human PTHR1 (Fig. 5). This assay was also run using A20 cells (targeting cells) treated with CLAMPs and then washed to remove unbound ligand. Application of targeting cells pre-treated with VHHMHC-II–PTH1–34 but not VHHGFP–PTH1–34 stimulated robust cAMP responses. These responses were observed when loading A20 cells with CLAMP concentrations of >10 nM. VHHMHC-II binds to MHC-II with half-maximal staining at concentrations of approximately 50 nM.35 This similarity in concentrations suggests a correlation between the amount of CLAMP loaded on the target cell and the extent of receptor activation on the receptor cell. Whether CLAMPs can simultaneously bind to both a targeting cell and receptor cell, of if receptor activation first requires dissociation from the targeting cell, is not clear from this study, although past work with immunocytokines suggests that such dissociation is not required.3 This type of correlation may provide guidelines for future efforts to use intercellular antibody tethering.
Footnotes |
| † Electronic supplementary information (ESI) available. See DOI: 10.1039/d1cb00118c |
| ‡ Current affiliation: National Institute of Health, National Institutes of Diabetes, Digestive and Kidney Disease, Laboratory of Bioorganic Chemistry, Bethesda, MD, 20894, USA. |
| § Current affiliation: Kennedy Institute of Rheumatology, University of Oxford, OX3 7FY, Oxford, UK. |
| This journal is © The Royal Society of Chemistry 2021 |