Correction: Inkjet assisted fabrication of planar biocompatible memristors

Georgii A. Illarionov; Denis S. Kolchanov; Ivan Mukhin; Oleg A. Kuchur; Mikhail V. Zhukov; Ekaterina Sergeeva; Vladimir V. Krishtop; Alexandr V. Vinogradov; Maxim I. Morozov

doi:10.1039/D0RA90019B

View PDF VersionPrevious ArticleNext Article

Open Access Article

This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

DOI: 10.1039/D0RA90019B (Correction) RSC Adv., 2020, 10, 9760-9760

Correction: Inkjet assisted fabrication of planar biocompatible memristors

Georgii A. Illarionov^a, Denis S. Kolchanov^a, Ivan Mukhin^ab, Oleg A. Kuchur^a, Mikhail V. Zhukov^ac, Ekaterina Sergeeva^a, Vladimir V. Krishtop^ad, Alexandr V. Vinogradov^a and Maxim I. Morozov*^a
^aLaboratory of Solution Chemistry of Advanced Materials and Technologies, ITMO University, Lomonosova str. 9, St. Petersburg, 191002, Russia. E-mail: maximm@alumni.ntnu.no; morozov@scamt-itmo.ru
^bSt. Petersburg Academic University, Khlopina 8/3, St. Petersburg, Russia
^cInstitute for Analytical Instrumentation RAS, Ivan Chernykh str. 31-33, St. Petersburg, 198095, Russia
^dResearch Center, Ivanovo State Medical Academy, Sheremetevsky ave. 8, Ivanovo, 153012, Russia

Received 25th February 2020 , Accepted 25th February 2020

First published on 9th March 2020

Abstract

Correction for ‘Inkjet assisted fabrication of planar biocompatible memristors’ by Georgii A. Illarionov et al., RSC Adv., 2019, 9, 35998–36004.

The authors regret that one of the co-authors, Ivan Mukhin, was omitted from the original article. The correct author list is as shown here.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.