Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

Correction: Interface-engineered hematite nanocones as binder-free electrodes for high-performance lithium-ion batteries

Lei Wang a, Kun Liang b, Guanzhi Wang b and Yang Yang *b
aState Key Laboratory for Oxo Synthesis and Selective Oxidation, National Engineering Research Center for Fine Petrochemical Intermediates, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 730000 Lanzhou, China
bNanoScience Technology Center, Department of Materials Science & Engineering, University of Central Florida, 4000 Central Florida Blvd, Orlando, Florida 32816, USA. E-mail: Yang.Yang@ucf.edu

Received 28th June 2018 , Accepted 28th June 2018

First published on 3rd July 2018


Correction for ‘Interface-engineered hematite nanocones as binder-free electrodes for high-performance lithium-ion batteries’ by Lei Wang et al., J. Mater. Chem. A, 2018, DOI: 10.1039/c8ta03106a.


In the original manuscript, the SEM images used in the table of contents image, Fig. 1f and the insets of Fig. 1d and f were incorrect and were not clearly labelled. Correct versions of the figures are given below.
image file: c8ta90157k-f1.tif
Fig. 1 (a) Schematic illustration of the fabrication of Fe2O3 NCs. (b) XRD patterns of Au/Fe, Fe2O3 NFs, and Fe2O3 NC samples. (c–f) Top and cross-sectional SEM images of (c) Au/Fe, (d) Fe2O3 NFs, and (e and f) Fe2O3 NCs. (g and h) TEM and HRTEM images of Fe2O3 NCs. The scale bars in the insets of (d and f) denote 1 μm.


image file: c8ta90157k-u1.tif
Table of Contents image

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.


This journal is © The Royal Society of Chemistry 2018