RSC Advances  

This study investigates the electrocatalytic water splitting capabilities of hexamethylene tetra-amine-linked NiCo-MOF, synthesized via hydrothermal approach. It reveals low overpotentials of 274 mV and 330 mV with Tafel slopes of 78 mV dec⁻¹ and 86 mV dec⁻¹ towards HER and OER respectively.

van der Waals heterostructure preparation based on hexagonal Sb and graphene, and its subsequent patterning through functionalization with benzyl substituents.

Recently, graphene and graphene-based nanomaterials have emerged as advanced carbon functional materials with specialized unique electronic, optical, mechanical, and chemical properties.

Carbon-based perovskite solar cells (PSCs) have emerged as a hopeful alternative in the realm of photovoltaics.

In this study, mesoporous activated carbon was prepared from bamboo parenchyma cells for MB removal from water.

An easy green non-covalent surface functionalization of pristine SWCNT was carried out by using ball grinding technology, resulting in the formation of a highly homogeneous and stable PA-SWCNTs dispersion reported firstly in water.

Cellulose/SiO₂-based composite microtube superfoam exhibits excellent flame retardant, thermal insulation and ablative resistance.

Treatment of carbon papers with Ti₃C₂T_x MXene solution for vanadium redox flow batteries.

Environmental degradation and energy constraint are important risks to long-term sustainability in the modern world.

Insoluble polymerized organic electrode is developed and wrapped in graphite sheets, which possesses low-impedance and realized a cycling life of over 1500 cycles. This work provides insights for exploring high-performance organic cathodes.

Investigation of heteroatom (N, B, O, P and S) doping impact on the structural, optoelectronic and photoluminescence properties of diamond-shaped graphene quantum dots for photovoltaics and nanomedical applications, and energy technologies.

Preparation of flower-like non-stoichiometric rGO-Bi₂O₃/Bi₂O_2.75 and rGO-Ag-Bi₂O₃/Bi₂O_2.75 hybrid thin film nanocomposites as an effective SERS substrate using a liquid/liquid interface method. The increase of hotspots leads to more favourable properties to improve the G-factor.

A smart BTA@SN-rGO nanocomposite was obtained via a one-step synthetic method and can provide remarkable long-term corrosion protection on metal.

Graphene oxide quantum dots (GOQDs) are promising candidates for biomedical applications since they have lower toxicity and higher biocompatibility than traditional semiconductor quantum dots.

This study shows using [Mo(PCy₃)₂(CO)₃] complex supporting on the porous materials boosts H₂ adsorption up to 9.3 times by enhancing gas access to metal sites.

This review summarizes the typical synthesis strategies and conversion mechanisms of porous transition metal-based electrode materials and discusses their energy storage characteristics and challenges in supercapacitors in a categorical manner.

This study provides low-cost and environmentally friendly in situ doping strategies for graphene and a simple method to enhance the performance of lithium metal anode.

Modified GO NPs were added to EP coatings on Zn to study their electrochemical, photocatalytic, and morphological properties. The Zn/EP-GO-APTES system showed the best organic pollutant degradation, keeping good corrosion resistance and adhesion.

The assessment of the impact of polyethyleneimine-grafted graphene oxide (PEI-GO) nanocomposite on rheological and filtration loss properties offers fresh perspectives on its potential as an additive in water-based drilling fluids applications.

Fe₃Al is a good magnetic loss absorber for microwave absorption.

A simple, easy-to-operate, and green route was developed to fabricate graphene-AgNPs/lignocellulose electrothermal film. Impressively, an outstanding steady-state temperature of 214 °C under 7 V was attained with 20 wt% graphene-AgNPs.

Molecular dynamics simulations were performed to tune the transport of water molecules in nanostructured membrane in a desalination process.

High-quality graphene in 42% monolayer and rest in bilayer was efficiently aqueously exfoliated in the presence of amphiphilic sulfated cellulose nanofibrils (SCNFs) or simultaneously with sulfated cellulose.

A graphene-based chemical sensor is fabricated which offers a notable response for nitrobenzene. The sensor shows the highest sensitivity of 231.1 for nitrobenzene and the fastest response of 6.9 s for benzyl chloride.

With the coming era of artificial intelligence (AI) dominated by high-tech electronics, developing high-performance microwave absorption materials (MAMs) is imperative to solve the problem of increasing electromagnetic inference and pollution.