Issue 16, 2024

Size-tunable silicon nanoparticles synthesized in solution via a redox reaction

Abstract

A current challenge in silicon chemistry is to perform liquid-phase synthesis of silicon nanoparticles, which would permit the use of colloidal synthesis techniques to control size and shape. Herein we show how silicon nanoparticles were synthesized at ambient temperature and pressure in organic solvents through a redox reaction. Specifically, a hexacoordinated silicon complex, bis(N,N′-diisopropylbutylamidinato)dichlorosilane, was reduced by a silicon Zintl phase, sodium silicide (Na4Si4). The resulting silicon nanoparticles were crystalline with sizes tuned from a median particle diameter of 15 nm to 45 nm depending on the solvent. Photoluminescence measurements performed on colloidal suspensions of the 45 nm diameter silicon nanoparticles indicated a blue emission signal, attributed to the partial oxidation of the Si nanocrystals or to the presence of nitrogen impurities.

Graphical abstract: Size-tunable silicon nanoparticles synthesized in solution via a redox reaction

Supplementary files

Article information

Article type
Paper
Submitted
14 Huk 2023
Accepted
29 Yan 2024
First published
02 Dzi 2024
This article is Open Access
Creative Commons BY-NC license

Nanoscale, 2024,16, 7958-7964

Size-tunable silicon nanoparticles synthesized in solution via a redox reaction

M. A. Parker, M. L. De Marco, A. Castro-Grijalba, A. Ghoridi, D. Portehault, S. Pechev, E. A. Hillard, S. Lacomme, A. Bessière, F. Cunin, P. Rosa, M. Gonidec and G. L. Drisko, Nanoscale, 2024, 16, 7958 DOI: 10.1039/D3NR05793C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements