Nipa
Chongdar
*ab,
Patricia
Rodríguez-Maciá
ac,
Edward J.
Reijerse
a,
Wolfgang
Lubitz
a,
Hideaki
Ogata
*d and
James A.
Birrell
*ae
aMax Planck Institute for Chemical Energy Conversion, Stiftstraße 34-36, 45470 Mülheim an der Ruhr, Germany. E-mail: chongdar.nipa@gmail.com
bCSIR-National Institute of Oceanography, Dona Paula-403004, Goa, India
cDepartment of Chemistry, Inorganic Chemistry Laboratory, University of Oxford, South Parks Road, Oxford, OX1 3QR, UK
dGraduate School of Life Science, University of Hyogo, Koto 3-2-1, Kamigori, Ako, 678-1297 Hyogo, Japan. E-mail: ogata@sci.u-hyogo.ac.jp
eSchool of Life Sciences, University of Essex, Colchester, CO4 3SQ, UK. E-mail: james.birrell@essex.ac.uk
First published on 27th February 2023
[FeFe] hydrogenases are exceptionally active catalysts for the interconversion of molecular hydrogen with protons and electrons. Their active site, the H-cluster, is composed of a [4Fe–4S] cluster covalently linked to a unique [2Fe] subcluster. These enzymes have been extensively studied to understand how the protein environment tunes the properties of the Fe ions for efficient catalysis. The sensory [FeFe] hydrogenase (HydS) from Thermotoga maritima has low activity and displays a very positive redox potential for the [2Fe] subcluster compared to that of the highly active prototypical enzymes. Using site directed mutagenesis, we investigate how second coordination sphere interactions of the protein environment with the H-cluster in HydS influence the catalytic, spectroscopic and redox properties of the H-cluster. In particular, mutation of the non-conserved serine 267, situated between the [4Fe–4S] and [2Fe] subclusters, to methionine (conserved in prototypical catalytic enzymes) gave a dramatic decrease in activity. Infra-red (IR) spectroelectrochemistry revealed a 50 mV lower redox potential for the [4Fe–4S] subcluster in the S267M variant. We speculate that this serine forms a hydrogen bond to the [4Fe–4S] subcluster, increasing its redox potential. These results demonstrate the importance of the secondary coordination sphere in tuning the catalytic properties of the H-cluster in [FeFe] hydrogenases and reveal a particularly important role for amino acids interacting with the [4Fe–4S] subcluster.
Fig. 1 (A) Arrangement of cofactors in TmHydS. The [4Fe–4S] clusters are shown as brown and yellow cubes and the [2Fe]H cluster is shown in chemical structure format. (B) Close-up structural view of the H-cluster including the surrounding second coordination sphere amino acids. The structure is of the C. pasteurianum (CpI) enzyme (PDB ID: 4XDC).12 Amino acid positions are labelled each with their CpI (top) and TmHydS (bottom) identities. Amino acids coloured in black (bold) were mutated in this study. The figure was prepared in Pymol. The dashed lines indicate hydrogen bonds between the H-cluster and surrounding amino acids. For an alternative view showing the location of Y223 see Fig. S2A.† |
The genome of the anaerobic hyperthermophilic bacterium T. maritima contains genes encoding three different types of [FeFe] hydrogenases; an electron bifurcating hydrogenase, a prototypical hydrogenase and a sensory hydrogenase (HydS).7,8 Although the physiological role of HydS is unclear, it is assumed to regulate the expression of another hydrogenase gene present in the same operon, in response to changes in H2 concentration in the cell.4,9 In contrast to the other two groups of [FeFe] hydrogenases, HydS contains a PAS (Per–Arnt–Sim) domain along with the hydrogenase domain (Fig. 1A). PAS domains are versatile sensory modules found in signal transduction proteins from all three kingdoms of life. Despite having very low sequence conservation, PAS domains have a conserved three-dimensional scaffold consisting of a core with five antiparallel β-sheets and several flanking α-helices.10,11 When the PAS domain detects a physical or chemical stimulus, structural changes occur within the β-sheet core and the signal then propagates through the α-helices to the effector domain.11 The predicted regulatory function of HydS is based on the presence of the PAS domain.9,13,14
Sequence analysis of the protein scaffold surrounding the H-cluster, and comparison with known structures, revealed further deviating features of HydS compared to the prototypical [FeFe] hydrogenases.6 The amino acids in the polypeptide chain encompassing the H-cluster in prototypical [FeFe] hydrogenase are highly conserved. Mutating them has severe effects on catalytic activities of the protein, thus, indicating the importance of the protein framework in maintaining the enzyme's outstanding activity.15
Comparative sequence analyses of prototypical (Clostridium pasteurianum HydA1, CpHydA1 or CpI, for which the structure is known) and sensory (TmHydS) [FeFe] hydrogenases showed that the cysteine residues ligating the iron atoms of the H-cluster and the residues stabilizing the proper conformation of the [2Fe] cofactor by H-bonding interactions are conserved in sensory type [FeFe] hydrogenases (Fig. 1B).4,6,16 However, three non-coordinating amino acids, C299, M353 and M497 (in CpHydA1), which are also quite well conserved in prototypical [FeFe] hydrogenases, are altered in sensory type enzymes (Fig. 1B). Mutations of these residues, dramatically reduced the catalytic activity of these prototypical enzymes.15 Therefore, variations in amino acid identities surrounding the H-cluster in sensory and prototypical type [FeFe] hydrogenases could be the reason for their differences in catalytic activities and physiological function.
Recent work on a related sensory [FeFe] hydrogenase (TamHydS) from Thermoanaerobacter mathranii shows high affinity for H2 as well as unusual reactivity with inhibitors.16 Furthermore, electrochemistry revealed irreversible behaviour not observed in the prototypical [FeFe] hydrogenases, which may however be related to its sensory function.17
In this work, we explored the role of those amino acids surrounding the H-cluster that show altered identities in sensory [FeFe] hydrogenases using site-directed mutagenesis. The resulting TmHydS variants were biochemically and spectroscopically characterized in order to understand the role these amino acids play in regulating catalytic activity and the electronic structure of the H-cluster. In particular, we found that mutating S267 (equivalent to M497 in CpHydA1) to methionine resulted in a substantial loss in activity, which appears to result from a change in the redox potential of the [4Fe–4S]H subcluster. The effects on the catalytic activity and the differences with the prototypical hydrogenase are discussed.
Another residue in prototypical [FeFe] hydrogenases that interacts with the bridge-head amine group of the ADT ligand is a conserved methionine (M497 in CpI), whose mutation to leucine severely reduced the catalytic activity of the enzyme.15 Spectroscopic analysis indicated that the M497L variant lacked a properly integrated [2Fe]H cluster, explaining its diminished activity.15 In sensory [FeFe] hydrogenases, however, the amino acid in this position is not conserved (Fig. S1†). In TmHydS, this position (267) is occupied by a serine residue (Fig. 1B). In spite of this, the artificially maturated protein showed typical spectroscopic signatures, indicating proper incorporation of the [2Fe]H cluster in TmHydS.6 Here, we have mutated this residue to methionine (S267M variant) to explore the function of this position in TmHydS.
The third residue, a conserved methionine in prototypical [FeFe] hydrogenases (M353 in CpI), has been proposed to stabilize the bridging CO ligand through electrostatic interaction between the sulfur atom of the methionine and the oxygen atom of the bridging CO. Mutating M353 in prototypical [FeFe] hydrogenases also lowered their catalytic activity, but not as severely as the other two aforementioned residues.15 In sensory [FeFe] hydrogenases, this position is mostly occupied by small amino acids like glycine (≈51%), serine (≈32%) or threonine (≈17%). In the prototypical [FeFe] hydrogenases CpII and CpIII this residue is replaced by Thr and Gly, respectively.25–28 These enzymes show high levels of activity, however, with a strongly altered catalytic bias. In TmHydS, this position is occupied by a glycine (G177) and we have also mutated this residue in TmHydS (G177M variant) to get some insight on how this position influences the properties of the H-cluster in sensory [FeFe] hydrogenases.
From a homology modelled structure of TmHydS, we hypothesize that Y223 (corresponds to the F417 residue in CpI), which lies in the vicinity of the amine-bridge of the H-cluster, could act as an alternative proton transfer residue (Fig. S2A†). It is notable here that in prototypical [FeFe] hydrogenases, this position is occupied by a phenylalanine residue (Fig. S2B†). Therefore, apart from the three aforementioned amino acids, residue Y223 in TmHydS was mutated to phenylalanine to investigate this hypothesis.
Like WT-TmHydS, the UV-vis spectra of all variants showed a broad feature in the 350–500 nm region with the highest intensity at 410 nm, indicating the presence of [4Fe–4S] clusters (Fig. S3†). The ratio of the absorption intensities at 280 nm and 400 nm, which provide a qualitative measure of FeS cluster incorporation, were for all variants similar to that of the wild type, indicating that the FeS cluster assembly was not affected by the mutations. Since a fully assembled [4Fe–4S]H cluster is a prerequisite for the successful incorporation of the [2Fe]ADT complex,29 we determined the iron content of the TmHydS variants to estimate the number of FeS clusters in the proteins (Table S2†). Like WT-TmHydS, all variants possessed ≈15 moles iron per mole of protein, in agreement with the expected presence of four [4Fe–4S] clusters. To obtain the holo-form of the TmHydS variants, the purified apo-proteins were incubated with [2Fe]ADT complex (see methods in ESI, ESI text 1†), and after removal of the excess [2Fe]ADT, the spectroscopic properties and the enzymatic activities of these variants were examined in detail.
Next, we determined if all TmHydS variants have similar levels of H-cluster occupancy by comparing the ratios of intensity of the most intense CO stretching band (1872 cm−1) to the intensity of the amide II band at 1540 cm−1 (Fig. S4B†). In the A131C, Y223F and S267M variants this ratio was found to be comparable to WT-TmHydS indicating that the incorporation of the [2Fe]H cluster is not affected by these mutations. In the case of the G177M variant, this ratio was approximately 2-fold lower than WT-TmHydS (Fig. S4C†). It is possible that the bulky methionine side chain disturbs the integration of the [2Fe]H subsite.
The positions of CO and CN− vibrational bands in FTIR spectroscopy serve as excellent indicators of the redox-state of the H-cluster. This is because reduction of the H-cluster leads to increased electron density on the Fe ions, which increases backbonding into the CO and CN− ligand π* orbitals, which weakens and lengthens the CO and CN− bonds and shifts their IR vibrational frequencies to lower energy.5 Formal reduction of the [2Fe]H subcluster gives the largest shifts (≈50 cm−1), while formal reduction of the [4Fe–4S]H subcluster only partially increases the electron density on [2Fe]H, giving smaller shifts (≈10 cm−1). Hence, this method is widely used in [FeFe] hydrogenase research. We have previously shown that the as-isolated state in WT-TmHydS is a one-electron reduced state in which the electron density mostly resides on [2Fe]H, the so-called (unprotonated) state [4Fe–4S]2+–[Fe(I)–Fe(I)] in which electron and proton transfer are decoupled.6 As mentioned before, all four variants showed the same FTIR bands in the as isolated state. Therefore, it appears that all four variants are in the state under these conditions. Treatment of all four variants with a reducing agent (sodium dithionite) resulted in FTIR spectra (Fig. 2A) essentially the same as the as-isolated state, confirming that the active center is already reduced. In the A131C variant, a shoulder at 1860 cm−1 is visible, probably from partial further reduction to the state [4Fe–4S]+–[Fe(I)–Fe(I)], where [4Fe–4S]H is also reduced. This may indicate a slightly more positive redox potential for the state in this variant. Moreover, peaks at 1960 cm−1 and 1980 cm−1 are visible, possibly from an additional, as yet unidentified, reduced state of TmHydS. Evidence for this state is also present in the other variants at similar energies. Based on similarities of the positions of the FTIR bands, this could represent the Hhyd:red or Hhyd:ox states with an over-oxidized [2Fe]H subcluster and a reduced or oxidized [4Fe–4S]H subcluster, respectively.30
We then oxidized the variants using the redox dye, thionine. The FTIR spectra of A131C, Y223F and G177M variants showed large (>35 cm−1) blue-shifts of the CO and CN− ligand vibrational bands following treatment with thionine, suggesting oxidation of [2Fe]H to give the most oxidized state, the so-called Hox state [4Fe–2S]2+–[Fe(II)–Fe(I)]. However, thionine treatment was insufficient to oxidize the S267M variant and so a slightly stronger oxidizing agent, hexaammineruthenium(III) chloride (HAR) was used (Fig. 2B). The FTIR peaks of thionine- or HAR-oxidized samples of the TmHydS variants appeared at similar positions (Fig. 2B) and resembled the FTIR spectra of the Hox state from WT-TmHydS. In the A131C variant, a residual peak from the state in the thionine-oxidized sample can still be observed.
We next performed electron paramagnetic resonance (EPR) spectroscopy on all these oxidized proteins to analyze how the mutations affect the magnetic properties of the H-cluster. In the Hox state, [2Fe]H is in a mixed valent Fe(II)Fe(I) configuration and [4Fe–4S]H is in the 2+ state, giving overall an EPR active, S = ½, state with a characteristic rhombic EPR spectrum. Apart from small differences around the g = 2 region attributable to the reduced thionine radical, the EPR spectra of all the variants are essentially identical but with small shifts in the g-values of the features in the spectrum, which can be assigned to small perturbations in the electronic structure of the H-cluster (Fig. 3).
Fig. 3 CW X-band (≈9.64 GHz) EPR spectra of TmHydS variants (A) wild type, Y223F and S267M, and (B) A131C and G177M, oxidized with thionine or hexaamineruthenium(III) chloride (for S267M) at pH 8 under 100% N2. Experimental spectra are shown in solid lines and simulations are shown as dashed lines. Evidence for the thionine radical can be identified from perturbations around the g = 2 region. The spectra were measured at 20 K, with 10 μW microwave power using 7.46 Gauss modulation amplitude. All other parameters are described in the methods section (see ESI†). The asterisks (*) indicate contributions from [4Fe–4S]+ clusters. |
The G177M variant showed 50% lower H2 oxidation and 30% lower proton reduction activities (Fig. 4). This result fits well with the lower loading of [2Fe]H in this variant mentioned earlier, thus, on a per [2Fe]H site basis the activity is very similar to WT. The Y223F variant showed somewhat higher H2 oxidation activity (≈25% higher) than the WT, and marginally lower (≈10% lower) H2 production activity compared to the WT, suggesting that this residue does not play a role in proton transfer in TmHydS (Fig. 4).
Unexpectedly the S267M variant shows a drastic drop in both H2 oxidation (≈95% lower than WT) and H2 production (93% lower than WT) activities (Fig. 4). Such a severe effect on activity indicates that S267 plays a crucial role in TmHydS and its mutation could have introduced some local structural deformation in the protein. However, this possibility can be ruled out based on the fact that S267M shows WT-like FTIR and EPR spectral features, which suggest that the conformation surrounding the H-cluster remains unaffected by this mutation. Another possibility that the S267M mutation could introduce a specific temperature-dependent instability can be excluded since H2 oxidation assays, which were initiated by adding TmHydS stored at room temperature to the pre-warmed assay buffer in a temperature-controlled cuvette holder, showed stable kinetics over the course of the measurement (Fig. S6†). Intrigued by this result, we proceeded to inspect whether: (i) S267 is a possible proton transfer residue, and mutating it to methionine blocks the proton transfer pathway, or (ii) S267 is important for the regulation of the redox potential of the H-cluster and the mutation to methionine disturbs that potential control.
The reductive titration of holo-S267M commenced at a mildly negative potential (−130 mV, vs. SHE), where the FTIR spectrum of the protein is indistinguishable from that of the HAR-oxidized sample, indicating that the H-cluster is in the Hox state (Fig. 6). As the potential was lowered, the intensities of these FTIR bands decreased, while a new set of bands started to appear from the state. After reaching the highest intensities, at ≈−450 mV vs. SHE, the intensities of these bands decreased as the potential was poised to even more negative values, and new bands appeared from the state. The intensities of this new set of FTIR bands reached a plateau at ≈−700 mV vs. SHE. The oxidative titrations showed essentially the same behavior (Fig. S7†).
Fig. 6 Reductive IR spectroelectrochemical titration of TmHydS S267M. (A) FTIR spectra of TmHydS S267M at various applied potentials (vs. SHE) showing typical spectra of the Hox (red), (blue) and (green) states. (B) The intensity of the most intense band in the Hox (1947 cm−1), (1869 cm−1) and (1861 cm−1) states, the latter two were determined from fitting Gaussian peaks (see Fig. S8†), is plotted against the applied potential and fitted with a model based on the Nernst equation using n = 1 for the (Em = −315 mV) and (Em = −620 mV) transitions. |
The intensity of the Hox state was possible to extract directly by following the intensity at 1947 cm−1. However, due to the fact that the peaks from the and states overlap, the intensities of the individual components were extracted by fitting the region between 1880 cm−1 and 1850 cm−1 with Gaussian peaks (Fig. S8†) with maxima at 1869 cm−1 and 1861 cm−1. The titration curves obtained by following the intensity of the most prominent FTIR band in each state could be fitted with the Nernst equation corresponding to two successive one-electron reductions, of which the first reduction occurs at ≈−315 mV vs. SHE, and the second at ≈−620 mV vs. SHE. The redox potential of the Hox to transition in the S267M variant is similar to that of WT-TmHydS (−300 mV vs. SHE)6 but the to transition is 50 mV more negative (−620 mV) than in WT (−570 mV, vs. SHE).6 The oxidative titrations gave very similar values for the two potentials (Fig. S7†). Since the to state is thought to involve reduction of [4Fe–4S]H, we hypothesize that S267 interacts with [4Fe–4S]H, possibly through hydrogen bonding with its hydroxyl group, to stabilize the reduced state of the cluster. When this amino acid is mutated to Met in S267M, the amino acid can no longer engage in hydrogen bonding and the redox potential of the cluster becomes more negative, thus it is more difficult to reduce.
In order to verify if the S267M variant also maintains this exceptional behavior, we performed an IR spectroelectrochemical titration on the PDT derivate of the S267M variant (S267MPDT). The reductive titration of this variant was carried out in the same way as explained above for S267MADT. At oxidizing potentials, S267MPDT showed FTIR bands similar to the Hox state and, as the potential was decreased below −310 mV, the intensities of these peaks dropped and new peaks started to appear (Fig. 7). The number of FTIR peaks showed that there are at least two states appearing, similar to those observed for WT-TmHydSPDT. The positions of one set of FTIR bands were shifted to lower energy relative to the HPDTox state by <10 cm−1, while the other set of peaks was shifted by >40 cm−1 to lower energy, indicating that the first set of bands belongs to a species where [4Fe–4S]H is reduced (the Hred state) while the second species formed is due to the reduction of [2Fe]H (the state). In terms of intensities, these peaks reached their saturation at ≈−500 mV, and remained stable until ≈−600 mV, after which a new set of peaks started to appear, at positions similar to the state. The oxidative titration showed essentially the same behaviour (Fig. S9†).
Fig. 7 Reductive IR spectroelectrochemical titration of TmHydSPDT S267M. (A) FTIR spectra of TmHydSPDT S267M at various applied potentials (vs. SHE) showing typical spectra of the Hox (red), Hred (orange), (blue) and (green) states. (B) The intensity of the most intense band in the Hox (1944 cm−1), Hred (1936 cm−1), (1862 cm−1) and (1857 cm−1) states, all determined from fitting Gaussian peaks (see Fig. S10†), is plotted against the applied potential and the data are fitted with a model based on the Nernst equation using n = 1 for the Hox/Hred (Em = −480 mV), (Em = −450 mV), (Em = −660 mV) and (Em = −690 mV) transitions. |
Since there is substantial overlap of the peaks in the Hox and Hred states as well as for the peaks in the and states, Gaussian peak fitting was applied (Fig. S10†). The intensities of the individual components were extracted by fitting the region from 1955 cm−1 to 1925 cm−1 (for Hox/Hred) and 1875 cm−1 to 1845 cm−1 (for and ) using Gaussian peaks with maxima at 1944 cm−1 (Hox), 1936 cm−1 (Hred), 1862 cm−1 () and 1857 cm−1 (). The reductive titration curves can be fitted with the Nernst equation following the model shown in Fig. 7B. Overall, S267MPDT, behaved in a way similar to that of WT-TmHydSPDT. However, the ratio of the Hred to states is altered such that dominates for S267MPDT, while Hred dominates for WT TmHydSPDT. This indicates a decreased thermodynamic stability of the Hred state in comparison with the state, in agreement with a more negative redox potential for [4Fe–4S]H in S267M. Indeed, fitting of the data with the Nernst equation showed that the Hox to transition has a redox potential (−450 mV) similar to WT (−460 mV), whereas the Hred to transition has a more positive potential (−660 mV) than WT (−690 mV), and the Hox to Hred and to transitions have more negative redox potentials (−480 mV and −690 mV, respectively) than WT (−440 mV and −670 mV, respectively). The oxidative titrations gave similar values of the potentials (Fig. S9†). The above observations suggest that mutation of S267 may have disrupted the redox-coupling between the two clusters and hence the activity of this variant is significantly lower than that of WT-TmHydS. Furthermore, electron transfer from [2Fe]H to [4Fe–4S]H is less favorable in the S267M variant compared with the WT enzyme, explaining the lower activity and difficulty in oxidizing the variant. It should be noted that the redox potential for the transition in S267MPDT (−450 mV) is 135 mV more negative than the same transition in S267MADT (−315 mV). A similar observation was also made for WT TmHydS,6 and again agrees with the idea that [2Fe]PDT has a more negative redox potential than [2Fe]ADT in TmHydS, and that this is due to the difference in electron withdrawing ability of the bridge-head atom of the dithiolate ligand.
We have investigated the function of the secondary coordination sphere amino acids by site-directed mutagenesis, generating seven TmHydS variants. Our results show that changes to the protein environment have only subtle effects on the spectroscopic and catalytic properties in most cases. However, the serine residue present at position 267 plays an important role in TmHydS, and appears to tune the potential of the H-cluster. We suggest that S267 influences the potential of [4Fe–4S]H by stabilizing the reduced state of the cluster. This residue is not conserved in other sensory hydrogenases (HydS), so the question arises if the identity of this amino acid is indeed important for the function of sensory [FeFe] hydrogenases, and why it is not well-conserved? It is possible that the redox potential of the [4Fe–4S] cluster regulates the sensory properties of the enzyme and that changing the amino acid at the S267 position can fine-tune the sensory behaviour. A clue here is that oxidation of S267M was more difficult than for WT. This would be expected to make the S267M variant sensitive only at low concentrations of H2. For Thermotoga maritima to appropriately respond to changes in the H2 concentration a sensor is required that can respond to a wide range of H2 concentrations. It would be interesting to see whether the H2 concentrations found in various environments correlate with the amino acid at this position in HydS from other bacteria.
More generally, our work presents a conundrum: which amino acids form the proton transfer pathway in TmHydS. Originally, we speculated that proton transfer in HydS may have been impeded due to the A131, which is normally occupied by cysteine in prototypical hydrogenases. However, the A131C variant actually had lower activity than WT. Firstly, this result supports the notion of an alternative proton transfer pathway, and, secondly, this suggests that interaction of cysteine with the ADT ligand in A131C HydS may alter the electronic structure of the H-cluster enough to interfere with catalysis. Another amino acid, Y223, located very close to the ADT ligand presents a possible starting point for an alternative proton transfer pathway. However, the Y223F variant lacking the hydroxyl group actually had increased H2 oxidation activity, in contrast to what would be expected for a crucial proton transfer pathway amino acid. S267 presented another possibility, and, at first, the extremely low activity of the S267M variant suggested a crucial role for this amino acid. However, the S267A variant retained 50% activity and so it seems unlikely that the hydroxyl group of S267 is a crucial proton transfer component. It cannot be excluded that a water molecule can substitute for the hydroxyl group, but it seems more likely that this amino acid does not constitute part of the proton transfer pathway.
The idea of alternative proton transfer pathways suggests that their evolution occurred quite late and that for a long time, primitive hydrogenase enzymes were functioning with only rudimentary proton transfer networks, possibly mediated by the diffusion of water to and from the active site. However, the selection pressure for fast and efficient H2 oxidation or proton reduction drove the evolution of highly tuned proton transfer pathways in modern prototypical [FeFe] hydrogenases. More research on diverse groups of [FeFe] hydrogenase is clearly needed to understand the evolution of the proton transfer pathway in more detail.
Overall, this work highlights the importance of tuning the properties of the two halves of the H-cluster, the [4Fe–4S] and [2Fe] subclusters, for enzyme function. In prototypical enzymes it appears to be crucial to maintain a very low redox potential for the [2Fe] subcluster so that it can only become reduced with concomitant protonation of the ADT ligand, ensuring efficient proton-coupled electron transfer. Furthermore, the redox potential for the [4Fe–4S] subcluster is close to the thermodynamic 2H+/H2 potential at pH 7 (E = −420 mV vs. SHE). In HydS the [2Fe] subcluster has quite a high redox potential and so it can be reduced without protonation of the ADT ligand. However, in HydS, the redox potential of the [4Fe–4S] cluster can be modulated to fine-tune the sensitivity of the H-cluster to H2.
Footnote |
† Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d2sc06432d |
This journal is © The Royal Society of Chemistry 2023 |