Issue 2, 2021

High-performance gas sensor array for indoor air quality monitoring: the role of Au nanoparticles on WO3, SnO2, and NiO-based gas sensors

Abstract

With the increasing demands of indoor air quality monitoring, highly sensitive and selective gas sensor arrays consisting of metal oxide semiconductors have been increasingly studied. As an effective strategy to obtain the desired performance, noble metal functionalization is frequently chosen owing to its target-specific sensing mechanisms. However, the lack of a comprehensive analysis on the sensing mechanisms of different combinations of metal oxides and noble metals limit the versatility of these sensor arrays for use in selective gas sensor arrays. In this study, we fabricate a 3 × 3 gas sensor array to obtain a reliable comparison of the sensing mechanism through the use of three metal oxides—WO3, SnO2 and NiO—in three different nanostructure forms: a thin film and dome-like nanostructures with and without Au nanoparticle (NP) decoration. The responses of the sensor arrays to four target gases (CH3COCH3, C6H5CH3, NH3, and H2S) are generally enhanced by the dome-like nanostructure and show distinctively enhanced responses when the sensors are decorated with Au NPs. Moreover, the dome-like SnO2 with Au NPs shows an increase of up to 121 times for C6H5CH3 compared with the pristine SnO2 thin film. Additionally, the sensitization effects of Au NPs depend on the types of metal oxides and gases, which improve the gas discrimination capability by diversifying the gas selectivity of the sensor units in the array. The prepared sensor array can distinguish four target gases by principal component analysis (PCA). The contributions of different enhancement mechanisms, which are dependent on the gases and metal oxides, are investigated by comparing the activation energy of each gas response with and without Au. The comparison among the chosen gases reveals that the decoration of Au NPs is effective for C6H5CH3 and NH3 regardless of the type of metal oxide. Among the metal oxides, the effects of Au NPs on gas responses are in the order of SnO2, NiO, and WO3, in which the energy level difference between the Au NPs and metal oxide are 0.2, 0.1, and −0.6 eV, respectively. These results confirm that the dominant enhancement mechanism of Au NPs for each combination of gases and metal oxide is a decrease in activation energy. Therefore, this study provides a systematic understanding of the sensitization mechanism of Au NPs on metal oxides toward gases for the fabrication of selective gas sensor arrays.

Graphical abstract: High-performance gas sensor array for indoor air quality monitoring: the role of Au nanoparticles on WO3, SnO2, and NiO-based gas sensors

Supplementary files

Article information

Article type
Paper
Submitted
05 sep 2020
Accepted
05 dec 2020
First published
10 dec 2020

J. Mater. Chem. A, 2021,9, 1159-1167

High-performance gas sensor array for indoor air quality monitoring: the role of Au nanoparticles on WO3, SnO2, and NiO-based gas sensors

J. Lee, Y. Jung, S. Sung, G. Lee, J. Kim, J. Seong, Y. Shim, S. C. Jun and S. Jeon, J. Mater. Chem. A, 2021, 9, 1159 DOI: 10.1039/D0TA08743B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements