Issue 42, 2018

High-performance vertical GaN-based near-ultraviolet light-emitting diodes on Si substrates

Abstract

High-performance vertical GaN-based near-ultraviolet (UV) light-emitting diodes (LEDs) on Si substrates with an electroluminescence emission wavelength of 395 nm have been fabricated by designing epitaxial structures to reduce the dislocation density and enhance the electron confinement and hole injection. By designing the epitaxial structures with a continuously Al-composition-graded AlGaN interlayer between an Al0.30Ga0.70N layer and an Al0.15Ga0.85N layer, the dislocation density in epitaxial films has been greatly reduced, and high-quality GaN epitaxial films grown on Si substrates with full-widths at half-maximum for GaN(0002) and GaN(10−12) X-ray rocking curves of 260 and 280 arcsec, respectively, have been obtained. Furthermore, by applying an electron blocking layer with 8 periods of AlInGaN/GaN superlattices, both electron confinement and hole injection have been enhanced accordingly. High-performance vertical GaN-based 395 nm UV LED chips show a high light output power of 535 mW and a low forward voltage of 3.10 V at a current of 350 mA, corresponding to a high wall-plug efficiency of 49.3%, which are the best values for GaN-based 395 nm UV LEDs ever reported. These high-performance near-UV LED chips find application in medical curing, lighting, etc.

Graphical abstract: High-performance vertical GaN-based near-ultraviolet light-emitting diodes on Si substrates

Article information

Article type
Communication
Submitted
05 စက် 2018
Accepted
25 စက် 2018
First published
26 စက် 2018

J. Mater. Chem. C, 2018,6, 11255-11260

High-performance vertical GaN-based near-ultraviolet light-emitting diodes on Si substrates

Y. Li, W. Wang, L. Huang, Y. Zheng, X. Li, X. Tang, W. Xie, X. Chen and G. Li, J. Mater. Chem. C, 2018, 6, 11255 DOI: 10.1039/C8TC04477E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements