Volume 247, 2023

Effect of [Na+]/[Li+] concentration ratios in brines on lithium carbonate production through membrane electrolysis

Abstract

Lithium is a fundamental raw material for the production of rechargeable batteries. The technology currently in use for lithium salts recovery from continental brines entails the evaporation of huge water volumes in desert environments. It also requires that the native brines reside for not less than a year in open air ponds, and is only applicable to selected compositions, not allowing its application to more diluted brines such as those geothermally sourced or waters produced from the oil industry. We have proposed an alternative technology based on membrane electrolysis. In three consecutive water electrolyzers, fitted alternately with anion and cation permselective membranes, we have shown, at proof-of-concept level, that it is possible to sequentially recover lithium carbonate and several by-products, including magnesium and calcium hydroxide, sodium bicarbonate, H2 and HCl. The big challenge is to bring this technology closer to practical implementation. Thus, the issue is how to apply relatively well-known electrochemical technology principles to large volumes and to a highly complex and saline broth. We have studied the application of this new methodology to ternary mixtures (NaCl, LiCl and KCl) with constant LiCl and KCl composition and increasing NaCl content. Results showed very similar behaviour for systems containing [Na+]/[Li+] concentration ratios ranging from 1.24 to 4.80. The voltage developed between the anode and cathode is almost the same in all systems at roughly 3.5 V when a constant current density of 50 A m−2 is applied. The three monovalent cations migrate with different rates across the cation exchange membrane, with Li+ being the most sluggish and thus crystallization of Li2CO3 only occurs close to completion of the electrolysis. The dimensionless concentration profiles are almost indistinguishable despite the changes in total salinity. The solids crystallized from different feeds showed higher Na+ and K+ contents as the initial Na+ concentration was increased. However, solids with over 99.9% purity in Li2CO3 could be obtained after a simple re-suspension treatment in hot water. The electrochemical energy consumption greatly increases with higher Na+ concentrations, and the amount of fresh water that can be recovered is diminished.

Graphical abstract: Effect of [Na+]/[Li+] concentration ratios in brines on lithium carbonate production through membrane electrolysis

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
23 фев. 2023
Accepted
05 апр. 2023
First published
05 апр. 2023

Faraday Discuss., 2023,247, 101-124

Effect of [Na+]/[Li+] concentration ratios in brines on lithium carbonate production through membrane electrolysis

W. R. Torres, N. C. Zeballos and V. Flexer, Faraday Discuss., 2023, 247, 101 DOI: 10.1039/D3FD00051F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements