Issue 47, 2019

Vacancy engineering of AuCu cocatalysts for improving the photocatalytic conversion of CO2 to CH4

Abstract

Photocatalytic conversion of CO2 and H2O to specific renewable fuels represents an appealing approach to abating the greenhouse effect and remedy the energy crisis. However, it often suffers from low yield and selectivity owing to charge recombination, poor reactivity as well as the occurrence of side reactions. Rational surface design of cocatalysts holds the key to address this grand challenge. In this article, the introduction of Cu vacancies onto the surface of cubic AuCu alloy cocatalysts is demonstrated to boost both the activity and selectivity in the photocatalytic conversion of CO2 with H2O to CH4. According to the experimental results, two effects contribute to the enhancement of CO2-to-CH4 conversion: (1) the removal of Cu improves the electron trapping ability of AuCu cocatalysts, which is instrumental to the 8-electron process of CH4 production; (2) low-coordinated surficial Cu sites neighboring the vacancies serve as highly selective sites for the reduction of CO2 to CH4. As a result, a highest selectivity of 94.7% for CH4 production with a maximal rate of 33.5 μmol gcat−1 h−1 is achieved by the vacancy-rich AuCu cocatalyst integrated with TiO2 nanosheets. This work provides fresh insights into engineering the surficial lattice of a cocatalyst at atomic precision for highly selective CO2 photoreduction through rational defect design.

Graphical abstract: Vacancy engineering of AuCu cocatalysts for improving the photocatalytic conversion of CO2 to CH4

Supplementary files

Article information

Article type
Paper
Submitted
08 септ. 2019
Accepted
28 окт. 2019
First published
30 окт. 2019

J. Mater. Chem. A, 2019,7, 27007-27015

Vacancy engineering of AuCu cocatalysts for improving the photocatalytic conversion of CO2 to CH4

Q. Liu, Q. Chen, T. Li, Q. Ren, S. Zhong, Y. Zhao and S. Bai, J. Mater. Chem. A, 2019, 7, 27007 DOI: 10.1039/C9TA09938G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements