Issue 6, 2019

Two-dimensional MAX-derived titanate nanostructures for efficient removal of Pb(ii)

Abstract

Two-dimensional (2D) nanomaterials have been identified as one of the promising materials due to their great promise for waste treatment. Currently, the investigation of wastewater remediation is highly imperative and still remains challenging. Here, a novel class of 2D MAX@titanate nanocomposites was fabricated by a simple oxidation and alkalization method, and they exhibited different morphologies and impressive elimination performance. The Pb(II) uptake processes were dramatically affected by the solution pH and reached equilibrium quickly. Abundant functional groups and enhanced specific surface areas endowed T-NTO nanofibers with outstanding adsorption capacity of 328.9 mg g−1 at pH = 5.0 and T = 298 K, which was much higher than that of T-KTO nanoribbons. Moreover, the possible mechanism was expounded with the aid of Raman, FT-IR, XRD and XPS analyses, in which the synergistic effect of surface complexation and ion exchange significantly contributed to the adsorption performance. On the basis of above analyses, this study not only presents a novel and facile strategy for preparing T-NTO and T-KTO nanostructures with superior adsorption capacity, but also broadens the prospective applications of other functional MAX-derived nanostructures in environmental cleanup.

Graphical abstract: Two-dimensional MAX-derived titanate nanostructures for efficient removal of Pb(ii)

Supplementary files

Article information

Article type
Paper
Submitted
27 окт. 2018
Accepted
03 јан. 2019
First published
04 јан. 2019

Dalton Trans., 2019,48, 2100-2107

Two-dimensional MAX-derived titanate nanostructures for efficient removal of Pb(II)

P. Gu, S. Zhang, C. Zhang, X. Wang, A. Khan, T. Wen, B. Hu, A. Alsaedi, T. Hayat and X. Wang, Dalton Trans., 2019, 48, 2100 DOI: 10.1039/C8DT04301A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements