Issue 40, 2021

Single sheets of graphene for fabrication of fibers with enhanced mechanical properties

Abstract

This paper reports the fabrication and mechanical properties of macroscale graphene fibers (diameters of 10 to 100 μm with lengths upwards of 2 cm) prepared from a single sheet of single-layer graphene grown via chemical vapor deposition (CVD). The breaking strength of these graphene fibers increased with consecutive tensile test measurements on a single fiber, where fiber fragments produced from a prior test exhibited larger breaking strengths. Additionally, we observed an overall reduction of surface folds and wrinkles, and an increase in their alignment parallel to the tensile direction. We propose that a foundation of this property is the plastic deformations within the fiber that accumulate through sequential tensile testing. Through this cyclic method, our best fiber produced a strength of 2.67 GPa with a 1 mm gauge length.

Graphical abstract: Single sheets of graphene for fabrication of fibers with enhanced mechanical properties

Supplementary files

Article information

Article type
Paper
Submitted
15 Jūl. 2021
Accepted
15 Sept. 2021
First published
20 Sept. 2021

Phys. Chem. Chem. Phys., 2021,23, 23124-23129

Author version available

Single sheets of graphene for fabrication of fibers with enhanced mechanical properties

M. G. Salim, L. A. Thimons, M. A. Kim, B. Carr, M. Montgomery, N. Tolman, T. D. B. Jacobs and H. Liu, Phys. Chem. Chem. Phys., 2021, 23, 23124 DOI: 10.1039/D1CP03238K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements