Issue 8, 2020

Hydrogen gas sensing using aluminum doped ZnO metasurfaces

Abstract

Hydrogen (H2) sensing is crucial in a wide variety of areas, such as industrial, environmental, energy and biomedical applications. However, engineering a practical, reliable, fast, sensitive and cost-effective hydrogen sensor is a persistent challenge. Here we demonstrate hydrogen sensing using aluminum-doped zinc oxide (AZO) metasurfaces based on optical read-out. The proposed sensing system consists of highly ordered AZO nanotubes (hollow pillars) standing on a SiO2 layer deposited on a Si wafer. Upon exposure to hydrogen gas, the AZO nanotube system shows a wavelength shift in the minimum reflectance by ∼13 nm within 10 minutes for a hydrogen concentration of 4%. These AZO nanotubes can also sense the presence of a low concentration (0.7%) of hydrogen gas within 10 minutes. Their rapid response time even for a low concentration, the possibility of large sensing area fabrication with good precision, and high sensitivity at room temperature make these highly ordered nanotube structures a promising miniaturized H2 gas sensor.

Graphical abstract: Hydrogen gas sensing using aluminum doped ZnO metasurfaces

  • This article is part of the themed collection: Gas sensing

Supplementary files

Article information

Article type
Paper
Submitted
12 Apr. 2020
Accepted
17 Jūn. 2020
First published
18 Jūn. 2020
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2020,2, 3452-3459

Hydrogen gas sensing using aluminum doped ZnO metasurfaces

S. Chatterjee, E. Shkondin, O. Takayama, A. Fisher, A. Fraiwan, U. A. Gurkan, A. V. Lavrinenko and G. Strangi, Nanoscale Adv., 2020, 2, 3452 DOI: 10.1039/D0NA00289E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements