Issue 3, 2019

Carbon nanotubes–elastomer actuator driven electrothermally by low-voltage

Abstract

Electroactive polymers (EAPs) have attracted attention in many fields such as robotics, sensors devices and biomedical devices. However, the practical application of these actuators has still problems due to incomplete reversibility and high applied voltage. In order to overcome these problems, in this study, we have shown actuator based on phase transition that is consisted of the carbon nanotubes yarn infiltrated with the mixture of elastomer and methanol. Our electrothermally driven hybrid coiled yarn muscle provides a work capacity of 0.49 kJ kg−1 and a tensile contraction of 30.5% within ∼3 s on an applied stress of 3.1 MPa at an applied DC voltage of 5 V. The maximum work capacity is under isobaric 23.4 MPa, which is 110 times that of typical mammalian skeletal muscles. This actuator may serve as a promising candidate for the practical use in soft robotics.

Graphical abstract: Carbon nanotubes–elastomer actuator driven electrothermally by low-voltage

Supplementary files

Article information

Article type
Communication
Submitted
11 Sept. 2018
Accepted
05 Dec. 2018
First published
02 Janv. 2019
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2019,1, 965-968

Carbon nanotubes–elastomer actuator driven electrothermally by low-voltage

J. Jeong, T. J. Mun, H. Kim, J. H. Moon, D. W. Lee, R. H. Baughman and S. J. Kim, Nanoscale Adv., 2019, 1, 965 DOI: 10.1039/C8NA00204E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements