Issue 7, 2022

Catalytic dissolution of metals from printed circuit boards using a calcium chloride–based deep eutectic solvent

Abstract

Due to their high metal content, printed circuit boards (PCBs) are an attractive resource for metal recovery. Until now, the dissolution and subsequent recovery of metals from PCBs involve either pyro- and/or hydrometallurgy. Such processing routes are typically very energy intensive and generate large volumes of solid residues and wastewater, which require energy to be further treated and disposed. Thus, there is a need to develop more energy-efficient and environmentally-compatible processes. This study investigates the use of catalytic dissolution of metals from PCBs in a eutectic solvent formed from calcium chloride hexahydrate and ethylene glycol (EG) as a potential autocatalytic methodology for selective metal recovery from PCBs. Two oxidising agents, FeCl3 and CuCl2, were used as redox catalysts as both of them demonstrate high solubility and fast electron transfer. The catalysts selectively etched copper, allowing gold and nickel to be recovered by simple filtration. Leaching rates determined with an optical profiler showed that CuCl2 enabled faster leaching kinetics compared to FeCl3 and this is discussed in terms of the dissolution mechanism.

Graphical abstract: Catalytic dissolution of metals from printed circuit boards using a calcium chloride–based deep eutectic solvent

Supplementary files

Article information

Article type
Paper
Submitted
16 Dec. 2021
Accepted
07 Marts 2022
First published
08 Marts 2022

Green Chem., 2022,24, 3023-3034

Catalytic dissolution of metals from printed circuit boards using a calcium chloride–based deep eutectic solvent

R. Marin Rivera, G. Zante, J. M. Hartley, K. S. Ryder and A. P. Abbott, Green Chem., 2022, 24, 3023 DOI: 10.1039/D1GC04694B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements