Issue 6, 2022

Gas-phase photoelectrocatalytic oxidation of volatile organic compounds using defective WO3/TiO2 nanotubes mesh

Abstract

The gas-phase photoelectrocatalytic (GPEC) approach has proven to be a promising one for overcoming the limitations of the conventional PEC technique for the removal of gaseous pollutants. However, the enhanced catalytic performance of this technique depends on the carrier transfer nature of the photoelectrodes employed. In this study, a defective WO3/TiO2 nanotube array mesh was developed and used as a photoelectrode in a ducted reactor to purify gaseous volatile organic compounds (VOCs). The defects were introduced by an electrochemical reduction approach, through which a significant increase in the carrier concentration and a decrease in its transfer barrier were achieved. As a result, the photogenerated electrons and holes were swiftly separated under a tiny external bias voltage. Furthermore, the bulk oxygen vacancies, generally serving as recombination centers for the carriers in a photocatalytic system, changed to charge carrier sources to facilitate the oxidation of VOCs with an external bias by weakening the trapping between holes and electrons. The ducted reactor so designed combined the advantages of both the defect strategy and the GPEC approach, which led to high performance with greater stability in the purification of gaseous VOCs.

Graphical abstract: Gas-phase photoelectrocatalytic oxidation of volatile organic compounds using defective WO3/TiO2 nanotubes mesh

Supplementary files

Article information

Article type
Paper
Submitted
09 Febr. 2022
Accepted
05 Maijs 2022
First published
19 Maijs 2022

Environ. Sci.: Nano, 2022,9, 2172-2181

Gas-phase photoelectrocatalytic oxidation of volatile organic compounds using defective WO3/TiO2 nanotubes mesh

X. Wang, H. Pan, M. Murugananthan, M. Sun and Y. Zhang, Environ. Sci.: Nano, 2022, 9, 2172 DOI: 10.1039/D2EN00130F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements