Issue 17, 2023

Engineering the Li-ion flux and interfacial chemistry toward a stable Li metal anode via a simple separator coating strategy

Abstract

Due to its remarkably high specific capacity of 3860 mA h g−1 and low reduction potential (−3.04 V vs. SHE), lithium metal has been identified as an ideal anode candidate for high-energy density lithium-ion cells. However, the growth of lithium dendrites caused by the deposition of lithium metal can affect the charge and discharge behavior of a cell and lead to short circuit, which is a safety concern and hinders its practical applications. Here, we prepare a composite separator polypropylene-Li1+xAlxTi2−x(PO4)3-indium tin oxide (PP–LATP–ITO) via a simple slurry coating method. The coating of LATP-ITO demonstrates unique advantages of Li-ion deposition as well as interfacial chemistry. Firstly, lithiophilic PP-ITO helps to reduce the energy barrier for Li deposition. In addition, the three-dimensional ion channels can regulate the transport of lithium ions and induce uniform Li metal plating and stripping. Furthermore, the in situ formed interface comprising of a Li–In alloy, Li3PO4 and LiF enables stable interfacial chemistry. As a result, compared with the PP separators, the voltage stability of the composite separators in Li–Li symmetric cells is greatly improved during the charge and discharge cycling. In addition, LCO/Li cells with the composite separator PP–LATP–ITO exhibit a higher specific capacity (140 mA h g−1) and good capacity maintenance during cycling. This work proposes a separator coating strategy that can inhibit dendrite formation and stabilize the lithium metal interface.

Graphical abstract: Engineering the Li-ion flux and interfacial chemistry toward a stable Li metal anode via a simple separator coating strategy

Article information

Article type
Paper
Submitted
07 Нау. 2023
Accepted
27 Нау. 2023
First published
28 Нау. 2023

New J. Chem., 2023,47, 7986-7994

Engineering the Li-ion flux and interfacial chemistry toward a stable Li metal anode via a simple separator coating strategy

S. Zhao, M. Ma, L. Gao, L. Gu, M. Chen, G. Han, T. Yang, J. Chen, D. Qi, P. Wang and X. Han, New J. Chem., 2023, 47, 7986 DOI: 10.1039/D3NJ01086D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements