Issue 1, 2021

Novel hierarchical CuNiAl LDH nanotubes with excellent peroxidase-like activity for wide-range detection of glucose

Abstract

Novel hierarchical CuNiAl layered double hydroxide (CuNiAl LDH) nanotubes were prepared with in situ transformation of Al2O3 produced using the atomic layer deposition (ALD) method. Based on the characterizations using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), FT-IR spectrometry, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), CuNiAl LDH displays a typical nanotube-like structure consisting of uniform ultrathin nanoflakes. It is also confirmed that nitrate precursors play a crucial role in the formation of the LDH hierarchical structure. The unique hierarchical tube-like structure for CuNiAl LDH can supply more active sites and higher surface areas, leading to outstanding peroxidase mimicking property. The kinetic analyses indicate that the catalytic behavior of CuNiAl LDH follows classic Michaelis–Menten models and the affinity of CuNiAl LDH to the substrate is significantly higher than horseradish peroxidase. A simple and label-free method was developed for the colorimetric detection of glucose. As low as 2.9 μM of glucose can be detected with a broad linear range from 10 to 200 μM. The established method is also proved to be suitable for glucose detection in juice samples.

Graphical abstract: Novel hierarchical CuNiAl LDH nanotubes with excellent peroxidase-like activity for wide-range detection of glucose

Supplementary files

Article information

Article type
Paper
Submitted
21 सितम्बर 2020
Accepted
19 नवम्बर 2020
First published
21 नवम्बर 2020

Dalton Trans., 2021,50, 95-102

Novel hierarchical CuNiAl LDH nanotubes with excellent peroxidase-like activity for wide-range detection of glucose

L. Wu, X. Zhou, G. Wan, Y. Tang, S. Shi, X. Xu and G. Wang, Dalton Trans., 2021, 50, 95 DOI: 10.1039/D0DT03288C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements