Issue 31, 2020

Molecular layer deposited alucone thin films from long-chain organic precursors: from brittle to ductile mechanical characteristics

Abstract

Molecular layer deposition (MLD) is a strongly emerging thin-film technique for deposition of ultra-thin inorganic–organic hybrid (“metalcone”) coatings directly from the gas phase, even on complex three-dimensional surfaces. In particular alucones (Al-based hybrids) have been found interesting e.g. for Li-ion battery and gas-barrier applications owing to the promise for enhanced mechanical performance provided by the organic fragments in the materials’ structure. However, the metalcones based on short/small organic fragments are relatively brittle from the mechanical perspective. Here, we demonstrate an efficient approach for tailoring mechanical properties of MLD-fabricated hybrid inorganic–organic thin films through control over the organic precursor chain length. The proof-of-concept data is presented for alucones prepared using trimethyl aluminum together with 1,6-hexanediol or 1,10-decanediol as the precursors. Tensile testing coupled with in situ optical microscopy reveals a gradual increase in stretchability with the increasing chain length, such that the crack onset strain value of 9.9 ± 0.2% is obtained for the 1,10-decanediol-based 100 nm-thick film. Through the demonstration of substantially suppressed crack propagation—as a sign of brittle-to-ductile transition—and the decrease in the elastic modulus value down to 4.6 ± 2.1 GPa, the mechanical performance of the alucone family is extended to the polymeric regime. The substantial increase in the mechanical performance within the metalcone material family makes the results particularly interesting for high-capacity high-volume-change battery electrodes requiring mechanically highly robust coatings.

Graphical abstract: Molecular layer deposited alucone thin films from long-chain organic precursors: from brittle to ductile mechanical characteristics

Supplementary files

Article information

Article type
Paper
Submitted
22 जून 2020
Accepted
17 जुलाई 2020
First published
20 जुलाई 2020

Dalton Trans., 2020,49, 10832-10838

Molecular layer deposited alucone thin films from long-chain organic precursors: from brittle to ductile mechanical characteristics

J. Niemelä, N. Rohbeck, J. Michler and I. Utke, Dalton Trans., 2020, 49, 10832 DOI: 10.1039/D0DT02210A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements