Issue 31, 2020

Electrochemically controlled energy release from a norbornadiene-based solar thermal fuel: increasing the reversibility to 99.8% using HOPG as the electrode material

Abstract

Solar energy conversion using molecular photoswitches holds great potential to store energy from sunlight in the form of chemical energy in a process that can be easily implemented in a direct solar energy storage device. In this context, we investigated the electrochemically triggered energy release of a solar thermal fuel based on the norbornadiene (NBD)/quadricyclane (QC) couple by photoelectrochemical IR reflection absorption spectroscopy (PEC-IRRAS). We studied the photo-induced conversion of the energy-lean 2-cyano-3-(3,4-dimethoxyphenyl)-norbornadiene (NBD′) to the energy-rich 2-cyano-3-(3,4-dimethoxyphenyl)-quadricyclane (QC′) and the electrochemically triggered reconversion using highly oriented pyrolytic graphite (HOPG) as an electrode material. We compared our results with the results obtained previously using Pt(111) electrodes and we characterized the photochemical and electrochemical properties of the storage system. NBD′ can be photochemically converted and electrochemically reconverted with very high selectivity. HOPG largely suppresses the unwanted catalytic reconversion which was observed on Pt(111). We performed repetitive cycling experiments for 1000 cycles to determine the reversibility of the system. Our results show that it is possible to reach reversibility above 99.8% using HOPG as an electrode material.

Graphical abstract: Electrochemically controlled energy release from a norbornadiene-based solar thermal fuel: increasing the reversibility to 99.8% using HOPG as the electrode material

Supplementary files

Article information

Article type
Communication
Submitted
09 janv. 2020
Accepted
27 févr. 2020
First published
28 févr. 2020

J. Mater. Chem. A, 2020,8, 15658-15664

Electrochemically controlled energy release from a norbornadiene-based solar thermal fuel: increasing the reversibility to 99.8% using HOPG as the electrode material

F. Waidhas, M. Jevric, M. Bosch, T. Yang, E. Franz, Z. Liu, J. Bachmann, K. Moth-Poulsen, O. Brummel and J. Libuda, J. Mater. Chem. A, 2020, 8, 15658 DOI: 10.1039/D0TA00377H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements