Issue 9, 2019

Determining what really counts: modeling and measuring nanoparticle number concentrations

Abstract

Particle number concentration (PNC) measurements are critical for research and regulatory decision making related to the potential applications and implications of nanotechnology. However, the degree to which different analytical methods yield similar PNCs has not yet been studied. In this study, monodisperse gold nanoparticles (AuNPs) with varying sizes (30 nm or 60 nm) and surface coatings (citrate, polyvinylpyrrolidone, or branched polyethyleneimine) were evaluated using five techniques: scanning electron microscopy (SEM), dynamic light scattering (DLS), differential mobility analysis (DMA), nanoparticle tracking analysis (NTA), and single particle inductively coupled plasma-mass spectrometry (spICP-MS). The two techniques that only measured the NP core size (spICP-MS and SEM), as opposed to the larger hydrodynamic diameter, yielded PNCs with the closest agreement (within 20% of each other), while PNCs among all techniques sometimes varied by a factor of 3. Positively charged AuNPs coated with branched polyethyleneimine yielded the most variable results. Deriving the PNC using the particle size distribution has several advantages over using only the mean size based on these results and statistical modeling given the substantial impact of the tails of the distribution toward smaller particles. The size distributions measured by the different techniques were also used to model the AuNP concentration that would reach the cells in an in vitro toxicity experiment. Surprisingly, there was a strong impact of the analytical technique on the modeled cellular AuNP concentration for some of the AuNPs.

Graphical abstract: Determining what really counts: modeling and measuring nanoparticle number concentrations

Supplementary files

Article information

Article type
Paper
Submitted
22 avr. 2019
Accepted
31 juil. 2019
First published
14 août 2019

Environ. Sci.: Nano, 2019,6, 2876-2896

Determining what really counts: modeling and measuring nanoparticle number concentrations

E. J. Petersen, A. R. Montoro Bustos, B. Toman, M. E. Johnson, M. Ellefson, G. C. Caceres, A. L. Neuer, Q. Chan, J. W. Kemling, B. Mader, K. Murphy and M. Roesslein, Environ. Sci.: Nano, 2019, 6, 2876 DOI: 10.1039/C9EN00462A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements