Issue 2, 2018

Determination of the maximum thickness for directed self-assembly of cylinder-forming PS-b-PMMA films on chemical patterns

Abstract

Previous studies on directed self-assembly (DSA) of cylinder-forming PS-b-PMMA mainly use films with a thickness comparable to the natural period of the block copolymer, Lo. It is unclear how thick the cylinder-forming PS-b-PMMA film can be directed to assemble on chemical patterns. In this work, a feasible approach is developed to determine the maximum thickness for DSA of cylinder-forming PS-b-PMMA films. The chemical pattern with a controlled correlation length (ξ) is fabricated by molecular transfer printing (MTP) by replicating the surface domain pattern of the template blend film and used to direct the self-assembly of the same blend film. The transition from substrate-controlled DSA to surface-controlled self-assembly is located in assembled films on MTP replica patterns with the thickness between 4.9Lo and 5.7Lo by comparing the ξ of the assembled film with the ξ of the original template. DSA of cylinder-forming PS-b-PMMA is achieved in films with thickness up to at least 4.9Lo. When the film is thicker than 5.7Lo, the substrate and surface effects decouple and the free surface controls the film surface morphology.

Graphical abstract: Determination of the maximum thickness for directed self-assembly of cylinder-forming PS-b-PMMA films on chemical patterns

Article information

Article type
Paper
Submitted
12 sept. 2017
Accepted
05 déc. 2017
First published
05 déc. 2017

Mol. Syst. Des. Eng., 2018,3, 342-347

Determination of the maximum thickness for directed self-assembly of cylinder-forming PS-b-PMMA films on chemical patterns

Y. Liu and S. Ji, Mol. Syst. Des. Eng., 2018, 3, 342 DOI: 10.1039/C7ME00101K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements