Issue 23, 2017

How to make persistent micelle templates in 24 hours and know it using X-ray scattering

Abstract

The controlled fabrication of nanoscale materials can enable new behaviors and properties as well as improved performance. For example, many electrochemical devices are made from porous materials where the architecture of both the porosity and the material each affect distinct processes. Recently, persistent micelle templating (PMT) emerged as a unique nanofabrication technique that enables decoupled control over the porosity and wall material dimensions via self-assembly. PMT control relies upon kinetic entrapment to preserve the micelle diameter while adding material. However, the development of PMT is currently cumbersome where time-intensive polymerizations and solution parameter searches are both required. Here we report simple SAXS based geometric models that significantly expedite the identification of the PMT window with a one-pot titration-approach. The models also quantitatively predict the nominal template diameter and wall-thickness within the PMT window. This approach yielded the first PMT criteria for a low molar mass block copolymer with ∼13 nm mesopores and continuously tunable wall-thickness with 2 Å increments. Furthermore, we demonstrate an accelerated synthesis that includes custom polymer fabrication and micelle templating within 24 h. The polymer synthesis was demonstrated without high-vacuum equipment and only used low-cost, commercially available reagents. These advances will ease and accelerate the use of PMT for a wide gamut of nanomaterials investigations.

Graphical abstract: How to make persistent micelle templates in 24 hours and know it using X-ray scattering

Supplementary files

Article information

Article type
Paper
Submitted
02 févr. 2017
Accepted
13 avr. 2017
First published
13 avr. 2017

J. Mater. Chem. A, 2017,5, 11840-11853

How to make persistent micelle templates in 24 hours and know it using X-ray scattering

A. Sarkar and M. Stefik, J. Mater. Chem. A, 2017, 5, 11840 DOI: 10.1039/C7TA01034F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements