Issue 41, 2022

Closed-loop chemical recycling of poly(ε-caprolactone) by tuning reaction parameters

Abstract

Chemical upcycling of commercial plastic materials to their starting monomers is of great significance to address the end-of-use issues of plastic materials and offers a closed-loop pathway for plastic sustainability. Poly(ε-caprolactone) (PCL) materials, synthesized by ring-opening polymerization of ε-caprolactone (ε-CL), have been applied commercially in the fields of medical equipment and 3D printing materials. Here, we demonstrate the first “ε-CL to PCL to ε-CL” and “PCL to ε-CL to PCL” closed-loop processes under the catalysis of magnesium bis[bis(trimethylsilyl)amide] [Mg(HMDS)2]. The thermodynamic parameters Image ID:d2py00953f-t1.gif and Image ID:d2py00953f-t2.gif for ε-CL indicate that ε-CL showed a ceiling temperature. After bulk polymerization of ε-CL, the direct bulk depolymerization of the resultant PCL to ε-CL was achieved under high temperature (180 °C) and vacuum (0.07 mbar) conditions via a domino-type unzipping depolymerization mode. The depolymerizations of PCL commodities were also achieved, providing monomeric ε-CL with high yield (up to 98%), selectivity and purity. The resultant ε-CL could smoothly repolymerize into new virgin-quality PCL materials, thus establishing its circular life cycle.

Graphical abstract: Closed-loop chemical recycling of poly(ε-caprolactone) by tuning reaction parameters

Supplementary files

Article information

Article type
Paper
Submitted
21 juil. 2022
Accepted
27 sept. 2022
First published
29 sept. 2022

Polym. Chem., 2022,13, 5897-5904

Closed-loop chemical recycling of poly(ε-caprolactone) by tuning reaction parameters

J. Su, G. Xu, B. Dong, R. Yang, H. Sun and Q. Wang, Polym. Chem., 2022, 13, 5897 DOI: 10.1039/D2PY00953F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements