Issue 3, 2022

A review of the impact of testing conditions on the performance and quality control of locally manufactured, point-of-use ceramic water filters

Abstract

The microbial removal performance of point-of-use ceramic water filters (CWFs) varies widely depending on the manufacturing practices and testing conditions. A critical review of the most recent studies on CWFs, published between 2009 and 2020, was performed. The goals of this review were to (1) identify inconsistencies in testing procedures used to assess CWF microbial removal performance and (2) discuss methods of standardization that could improve our understanding of the effects of manufacturing parameters on CWFs used worldwide. First, the impacts of manufacturing materials on CWF performance were reviewed and analyzed. Our review of manufacturing variables shows that CWFs made with smaller grained clays, sawdust, and silver nanoparticles have slightly higher log removal values (LRVs) compared to CWFs made with larger grained clays, rice husks, or silver nitrate. Next, we reviewed the potential impacts of testing conditions (focusing on influent water chemistry) on CWF performance. The variability in CWF testing conditions makes it difficult to aggregate the data on CWFs to show the impacts of manufacturing conditions on microbial removal. Standardized methodologies for CWF testing are one potential solution for providing more useful information highlighting the effect of manufacturing conditions on CWF performance. We discuss the application of two available CWF testing protocols from the United States Environmental Protection Agency (USEPA) and World Health Organization (WHO) for their applicability as standardized quality control techniques. The application of either of these protocols will bring greater consistency and easier comparisons between studies on CWFs. Our assessment of the impacts of manufacturing and testing conditions on CWF performance provides insights on the benefits of the USEPA and WHO standardized testing schemes. The application of a standardized quality control technique could improve CWFs in the field by identifying how differences in manufacturing affect performance.

Graphical abstract: A review of the impact of testing conditions on the performance and quality control of locally manufactured, point-of-use ceramic water filters

Supplementary files

Article information

Article type
Critical Review
Submitted
18 août 2021
Accepted
29 janv. 2022
First published
07 févr. 2022

Environ. Sci.: Water Res. Technol., 2022,8, 510-522

Author version available

A review of the impact of testing conditions on the performance and quality control of locally manufactured, point-of-use ceramic water filters

Z. Shepard and V. Oyanedel-Craver, Environ. Sci.: Water Res. Technol., 2022, 8, 510 DOI: 10.1039/D1EW00587A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements