Issue 40, 2022

Pinpointing basic sites formed upon incorporation of iron in hierarchical SAPO-11 using catalytic model reactions

Abstract

By utilizing previously established catalytic model reactions, a method for probing the topological location of transition metal sites incorporated in hierarchical silicoaluminophosphates (SAPOs) is presented. For the first time, iron(III)-incorporated hierarchical SAPO-11 (FeCTAB-11) was prepared and thoroughly characterized with conventional iron(III)-incorporated SAPO-11 (FeSAPO-11) as a reference. Initially, inductively coupled plasma – mass spectrometry (ICP-MS) indicated that the FeSAPOs contained similar amounts of metal (∼2.0 wt%), while N2-physisorption confirmed the bimodal porosity of the hierarchical FeCTAB-11. Furthermore, X-ray absorption spectroscopy (XAS) revealed that iron(III) was isomorphously incorporated into both SAPO-11 samples, whereas CO2-temperature programmed desorption (TPD) revealed the first reported presence of strong basic sites in the vicinity of a transition metal incorporated into a SAPO framework. The location of the basic sites, and thus the incorporated iron, was subsequently probed by studying the products of the base-catalyzed vapor phase isomerization of cyclohexanone oxime (Beckmann rearrangement, BMR) model reaction. Through an increased lifetime for the base-catalyzed production of aniline, the incorporated iron for FeCTAB-11 was found to be located in highly accessible mesopores, whereas the conventional FeSAPO-11 had incorporated iron located in its micropores. Lastly, the methanol-to-hydrocarbons (MTH) model reaction showed that both FeSAPOs only had Brønsted acid sites in the micropores of the structures. This was used to verify the pore connectivity of the hierarchical FeCTAB-11 by utilizing the base-catalyzed BMR mechanism's dependency on acid sites.

Graphical abstract: Pinpointing basic sites formed upon incorporation of iron in hierarchical SAPO-11 using catalytic model reactions

Supplementary files

Article information

Article type
Paper
Submitted
12 juil. 2022
Accepted
12 sept. 2022
First published
13 sept. 2022

Dalton Trans., 2022,51, 15251-15262

Pinpointing basic sites formed upon incorporation of iron in hierarchical SAPO-11 using catalytic model reactions

D. Ali, Z. Li, M. M. Azim, H. L. Lein and K. Mathisen, Dalton Trans., 2022, 51, 15251 DOI: 10.1039/D2DT02263J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements