Issue 19, 2021

Naphthalene-diimide-based all-conjugated block copolymer as an effective compatibilizer to improve the performance and thermal stability of all-polymer solar cells

Abstract

A new donor–acceptor-type all-conjugated block copolymer (BCP), P(NDI-DBDT)-block-P(NDI-2T), is synthesized through the coupling of a naphthalene diimide (NDI)-bithiophene (2T) segment-based polymer (P1) and an NDI-dithienylbenzodithiophene (DBDT) segment-based polymer (P2). P1 has a prevailing backbone for NDI-based polymer acceptors, while P2 is modified to contain a p-type DBDT moiety to facilitate miscibility with the DBDT-based polymer donors. When adding 1 wt% BCP (the optimized blending amount) into the PBDB-T:N2200 blend that possesses similar constituent units to the BCP, the derived device can deliver an enhanced power conversion efficiency (PCE) of 7.07%, outperforming the control device (with a PCE of 5.71%). This improvement is found to arise from the more optimized bulk-heterojunction (BHJ) morphology as a result of facilitated intermixing between the photoactive components. This leads to reduced charge recombination and potential loss for the device. Moreover, the more optimized BHJ morphology endows the device with improved thermal robustness. It demonstrates longer T80 lifetimes when stored under constant thermal conditions at high temperatures. Consequently, the device lifetime can be extended to ∼2 years when stored under inert conditions at 50 °C. These results demonstrate that the rationally designed all-conjugated BCP can effectively modulate the BHJ morphology of an all-polymer blend to simultaneously enhance its photovoltaic performance and stability.

Graphical abstract: Naphthalene-diimide-based all-conjugated block copolymer as an effective compatibilizer to improve the performance and thermal stability of all-polymer solar cells

Supplementary files

Article information

Article type
Research Article
Submitted
12 juin 2021
Accepted
09 août 2021
First published
09 août 2021

Mater. Chem. Front., 2021,5, 7216-7227

Naphthalene-diimide-based all-conjugated block copolymer as an effective compatibilizer to improve the performance and thermal stability of all-polymer solar cells

A. Kato, L. Su, Y. Lin, L. Wang, W. Chen, C. Chueh and T. Higashihara, Mater. Chem. Front., 2021, 5, 7216 DOI: 10.1039/D1QM00859E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements