Issue 10, 2021

A graphene-based hydrogel monolith with tailored surface chemistry for PFAS passive sampling

Abstract

Aquatic contamination by per- and polyfluorinated alkyl substances (PFAS) has attracted global attention due to their environmental and health concerns. Current health advisories and surface water regulatory limits require PFAS detection in the parts per trillion (ppt) range. One way to achieve those low detection limits is to use a reliable passive sampling-based monitoring tool for PFAS, as exists for numerous nonpolar persistent organic pollutants. Here we introduce a new graphene-based hydrogel monolith and describe its synthesis, chemical functionalization, property characterization, and testing as a PFAS equilibrium passive sampler. The graphene monoliths were self-assembled by hydrothermal treatment from graphene oxide (GO) aqueous dispersions to produce free standing cylinders of ∼563 mm3 volume consisting of 4 wt% thin-walled porous graphene and ∼96 wt% water. The uptake of 23 PFAS was measured on the as-produced monoliths, and equilibrium partition coefficients (KSW), were derived for longer chain (C ≥ 8) perfluoroalkyl acids (PFAA) and neutral precursors such as sulfonamides (log KSW range 1.9–3.6). To increase the KSW for shorter chain PFAA, the monoliths were chemically modified by a new diazonium-based grafting reaction that introduces positive surface charge without damage to the graphenic backbone. Introduction of benzylamine moieties through the diazonium intermediate switches zeta potential at pH 7 from −45 mV (as-produced graphene) to +5 mV. This modification increased the sorption of short and middle chain PFAA by ten-fold (e.g. log KSW for PFBA increased from 1.3 to 2.2), thereby improving the functionality of the passive sampler device for a wider range of PFAS. Field deployments demonstrated that the graphene monoliths were capable of detecting key PFAS in the Delaware River.

Graphical abstract: A graphene-based hydrogel monolith with tailored surface chemistry for PFAS passive sampling

Supplementary files

Article information

Article type
Paper
Submitted
07 juin 2021
Accepted
22 juil. 2021
First published
10 août 2021

Environ. Sci.: Nano, 2021,8, 2894-2907

Author version available

A graphene-based hydrogel monolith with tailored surface chemistry for PFAS passive sampling

J. Becanova, Z. S. S. L. Saleeba, A. Stone, A. R. Robuck, R. H. Hurt and R. Lohmann, Environ. Sci.: Nano, 2021, 8, 2894 DOI: 10.1039/D1EN00517K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements