Issue 9, 2020

Synthesis of self-assembled spindle-like CePO4 with electrochemical sensing performance

Abstract

Three different morphologies of CePO4 nanocrystals (rods, columns, and spindle-like assembled nanosheets), spindle-like LaPO4, spindle-like PrPO4, and TbPO4 microspheres were successfully synthesized using a hydrothermal method. Interestingly, the morphology of the self-assembled spindle-like CePO4 underwent a change from big spindles to short spindles, to a cluster of spindles, and finally to spindle-like assembled nanocrystals with the increase of time. Using a single-step process, the nanocrystals were fixed on the surface of a glassy carbon electrode (GCE) using a Nafion membrane solution, which increased the specific surface area and electron transfer rate. The presence of CePO4, especially the spindle-like assembled nanosheet CePO4 (S-CePO4), greatly improved the effective surface area of the GCE, thereby increasing the conductivity of the GCE-based electrochemical sensor. The highly ordered superstructures of S-CePO4 were assembled from homogeneous spindles with an average length of 100 nm and a center diameter of approximately 50 nm. The use of the S-CePO4 sensor resulted in a 229% increase of the specific surface area (compared with that of the bare GCE-based sensor) and excellent electrocatalytic performance toward the electrochemical oxidation of hydroquinone (HQ), catechol (CC), and resorcinol. The linear range and detection limit for the determination of CC were 0.07 and 20–1200 μM, respectively. Our findings demonstrate the potential of the S-CePO4@GCE-based electrochemical sensor for the simultaneous determination of CC and HQ. The morphology and structure of S-CePO4 reduced the resistance significantly and increased the effective active surface area and the electrolyte contact area, making it more advantageous to the utilization of the active components.

Graphical abstract: Synthesis of self-assembled spindle-like CePO4 with electrochemical sensing performance

Supplementary files

Article information

Article type
Paper
Submitted
01 sept. 2019
Accepted
19 oct. 2019
First published
21 oct. 2019

CrystEngComm, 2020,22, 1610-1618

Synthesis of self-assembled spindle-like CePO4 with electrochemical sensing performance

J. Wang, X. Wu, X. Cao, Y. Jiang, D. Zhang, T. Yang, F. Zhang and Y. Luo, CrystEngComm, 2020, 22, 1610 DOI: 10.1039/C9CE01380F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements