Issue 9, 2020

A review on synthesis and engineering of crystal precursors produced via coprecipitation for multicomponent lithium-ion battery cathode materials

Abstract

Interest in developing high performance lithium-ion rechargeable batteries has motivated research in precise control over the composition, phase, and morphology during materials synthesis of battery active material particles for decades. Coprecipitation, as one of the most reported methods in the literature to produce precursors for lithium-ion battery active materials, has drawn attention due to its simplicity, scalability, homogeneous mixing at the atomic scale, and tunability over particle morphology. This highlight summarizes the advancements that have been made in producing crystalline particles of tunable and complex morphologies via coprecipitation for use as lithium-ion battery precursor materials. Comparison among different crystallization reagents, solution conditions that influence the properties of crystal particles, and the fundamental knowledge from equilibrium and/or kinetic study of the coprecipitation processes, are systematically discussed. The research reports and guiding principles summarized in this highlight are meant to improve selections made by researchers to efficiently determine synthesis conditions. In addition, it is desired that the methods applied from the study of crystallization will inspire researchers to pursue further investigation of the nucleation and growth mechanisms of these coprecipitation processes, which will be necessary to achieve truly predictive particle synthesis.

Graphical abstract: A review on synthesis and engineering of crystal precursors produced via coprecipitation for multicomponent lithium-ion battery cathode materials

Article information

Article type
Highlight
Submitted
03 mai 2019
Accepted
04 juil. 2019
First published
05 juil. 2019

CrystEngComm, 2020,22, 1514-1530

Author version available

A review on synthesis and engineering of crystal precursors produced via coprecipitation for multicomponent lithium-ion battery cathode materials

H. Dong and G. M. Koenig, CrystEngComm, 2020, 22, 1514 DOI: 10.1039/C9CE00679F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements