Issue 6, 2018

Preparation of perovskite-embedded monodisperse copolymer particles and their application for high purity down-conversion LEDs

Abstract

Perovskite nanoparticle (NP)-embedded copolymer particles are prepared via self-emulsion polymerization (SEP) and a vapor-assisted solution process (VASP). The prepared particles are self-assembled to form photonic bandgaps (PBs), which modified the photoluminescence (PL) spectrum of the embedded perovskite NPs to have an enhanced PL intensity and a reduced full width at half maximum (FWHM).

Graphical abstract: Preparation of perovskite-embedded monodisperse copolymer particles and their application for high purity down-conversion LEDs

Supplementary files

Article information

Article type
Communication
Submitted
28 mai 2018
Accepted
23 août 2018
First published
24 août 2018

Mater. Horiz., 2018,5, 1120-1129

Preparation of perovskite-embedded monodisperse copolymer particles and their application for high purity down-conversion LEDs

S. Lee, J. W. Choi, S. Kumar, C. Lee and J. Lee, Mater. Horiz., 2018, 5, 1120 DOI: 10.1039/C8MH00619A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements