Issue 12, 2016

Fully solution-processed transparent electrodes based on silver nanowire composites for perovskite solar cells

Abstract

We report all-solution-processed transparent conductive electrodes based on Ag nanowire (AgNW)-embedded metal oxide composite films for application in organometal halide perovskite solar cells. To address the thermal instability of Ag nanowires, we used combustive sol–gel derived thin films to construct ZnO/ITO/AgNW/ITO composite structures. The resulting composite configuration effectively prevented the AgNWs from undergoing undesirable side-reactions with halogen ions present in the perovskite precursor solutions that significantly deteriorate the optoelectrical properties of Ag nanowires in transparent conductive films. AgNW-based composite electrodes had a transmittance of ∼80% at 550 nm and sheet resistance of 18 Ω sq−1. Perovskite solar cells fabricated using a fully solution-processed transparent conductive electrode, Au/spiro-OMeTAD/CH3NH3PbI3 + m-Al2O3/ZnO/ITO/AgNW/ITO, exhibited a power conversion efficiency of 8.44% (comparable to that of the FTO/glass-based counterpart at 10.81%) and were stable for 30 days in ambient air. Our results demonstrate the feasibility of using AgNWs as a transparent bottom electrode in perovskite solar cells produced by a fully printable process.

Graphical abstract: Fully solution-processed transparent electrodes based on silver nanowire composites for perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
09 juil. 2015
Accepted
22 sept. 2015
First published
28 sept. 2015

Nanoscale, 2016,8, 6308-6316

Author version available

Fully solution-processed transparent electrodes based on silver nanowire composites for perovskite solar cells

A. Kim, H. Lee, H. Kwon, H. S. Jung, N. Park, S. Jeong and J. Moon, Nanoscale, 2016, 8, 6308 DOI: 10.1039/C5NR04585A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements