Issue 26, 2013

Aerosol-assisted delivery of precursors for chemical vapour deposition: expanding the scope of CVD for materials fabrication

Abstract

The production of thin films of materials has become the attention of a great deal of research throughout academia and industry worldwide owing to the array of applications which utilise them, including electronic devices, gas sensors, solar cells, window coatings and catalytic systems. Whilst a number of deposition techniques are in common use, chemical vapour deposition (CVD) is an attractive process for the production of a wide range of materials due to the control it offers over film composition, coverage and uniformity, even on large scales. Conventional CVD processes can be limited, however, by the need for suitably volatile precursors. Aerosol-assisted (AA)CVD is a solution-based process which relies on the solubility of the precursor, rather than its volatility and thus vastly extends the range of potentially applicable precursors. In addition, AACVD offers extra means to control film morphology and concurrently the properties of the deposited materials. In this perspective we discuss the AACVD process, the influence of deposition conditions on film characteristics and a number of materials and applications to which AACVD has been found beneficial.

Graphical abstract: Aerosol-assisted delivery of precursors for chemical vapour deposition: expanding the scope of CVD for materials fabrication

Article information

Article type
Perspective
Submitted
05 mars 2013
Accepted
11 avr. 2013
First published
15 avr. 2013

Dalton Trans., 2013,42, 9406-9422

Aerosol-assisted delivery of precursors for chemical vapour deposition: expanding the scope of CVD for materials fabrication

P. Marchand, I. A. Hassan, I. P. Parkin and C. J. Carmalt, Dalton Trans., 2013, 42, 9406 DOI: 10.1039/C3DT50607J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements