Issue 39, 2024

Weakened charge trapping at the electrode/active layer interface in a bulk heterojunction-based organic phototransistor for quick photomultiplication

Abstract

Charge trapping and release have a significant impact on the performance of organic phototransistors (OPTs), especially for the balance of response time and photomultiplication. These processes are usually present near the interface with different energy levels or mobilities. In this paper, charge trapping and release properties at the electrode/active layer interface in PDPPBTT:PC61BM based organic phototransistors have been discussed in detail. We compared the effect of interfacial charge trapping at a Ag or Au electrode on the photodetection performance of OPTs in the absence and presence of acceptors. When acceptors were added to form a bulk heterojunction as the active layer, it was fascinating to observe that not only did the BHJ with a smaller energy level difference become the main charge trap sites, but also the charge trap near the electrode was evidentially weakened and easy to release, which is supported by the turn-on voltage drift (ΔVon), contact resistance (R) change and accelerated response time. This originated from acceptor-assisted carrier recombination near the metal electrode. The results show that BHJ based phototransistors are good candidates for quick photomultiplication photodetectors.

Graphical abstract: Weakened charge trapping at the electrode/active layer interface in a bulk heterojunction-based organic phototransistor for quick photomultiplication

Supplementary files

Article information

Article type
Paper
Submitted
27 May 2024
Accepted
27 Aug 2024
First published
10 Sep 2024

J. Mater. Chem. C, 2024,12, 16100-16107

Weakened charge trapping at the electrode/active layer interface in a bulk heterojunction-based organic phototransistor for quick photomultiplication

C. Liu, S. Xiong, D. Sun, Z. Xie and L. Liu, J. Mater. Chem. C, 2024, 12, 16100 DOI: 10.1039/D4TC02177K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements