Issue 5, 2021

Boosting the thermoelectric performance of p-type polycrystalline SnSe with high doping efficiency via precipitation design

Abstract

Polycrystalline SnSe has been widely studied in recent years due to its potential in thermoelectric applications. However, the carrier concentration and electrical performance have not been effectively optimized due to the low doping efficiency for most of the reported polycrystalline SnSe systems. Herein, we report a high power factor (PF) of 0.89 mW m−1 K−2 at 790 K in p-type polycrystalline SnSe, which benefits from the significantly optimized carrier concentration by (Na and Ag) co-doping and the enhancement of the Seebeck coefficient due to the increase of band effective mass via Te alloying. Meanwhile, the coexistence of Ag and Te rich precipitates and the increased grain boundaries in the bulk impressively reduce the lattice thermal conductivity to 0.36 W m−1 K−1 at 790 K along the direction perpendicular to the pressure. Consequently, a high thermoelectric figure of merit zT of 1.47 at 790 K and an average zT of 0.67 over the measured temperature range have been achieved in the polycrystalline SnSe sample.

Graphical abstract: Boosting the thermoelectric performance of p-type polycrystalline SnSe with high doping efficiency via precipitation design

Supplementary files

Article information

Article type
Paper
Submitted
21 Nov 2020
Accepted
18 Dec 2020
First published
21 Dec 2020

J. Mater. Chem. A, 2021,9, 2991-2998

Boosting the thermoelectric performance of p-type polycrystalline SnSe with high doping efficiency via precipitation design

C. Li, K. Peng, H. Wu, N. Li, B. Zhang, G. Wang, X. Gong, X. Lu, G. Wang and X. Zhou, J. Mater. Chem. A, 2021, 9, 2991 DOI: 10.1039/D0TA11356E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements