Issue 8, 2020

Ir- and Ru-doped layered double hydroxides as affordable heterogeneous catalysts for electrochemical water oxidation

Abstract

Three M-doped LDHs (M = noble metal active site, LDH = layered double hydroxides; Ir-1, Ir-ZnAl; Ru, Ru-ZnAl; Ir-2, Ir-MgAl), containing small amounts of M (ca. 2 mol% and even <1 mol% for Ru and Ir, respectively), were prepared by following simple and established synthetic procedures. Their characterization indicates that M atoms are effectively incorporated into the brucite-like layers of LDH, without phase segregation. The resulting materials catalyse electrochemical water oxidation (WO), when immobilized in carbon paste electrodes, with performances that exceed those of the benchmark system IrO2, as probed by linear sweep voltammetry (LSV). Some of these catalysts undergo continuous activation upon chronoamperometric and chronopotentiometric treatments over several hours. The crystalline structure of all of them is preserved during electrocatalytic experiments, and no significant leaching of noble metal in solution is detected. The results herein reported highlight the remarkable potential of these doped M-LDHs and confirm that dispersing Ir and Ru centers in layered and cheap inorganic materials results in easily accessible metal centers, providing highly active catalysts, while minimizing the utilization of noble metals.

Graphical abstract: Ir- and Ru-doped layered double hydroxides as affordable heterogeneous catalysts for electrochemical water oxidation

Supplementary files

Article information

Article type
Paper
Submitted
06 Nov 2019
Accepted
22 Jan 2020
First published
22 Jan 2020

Dalton Trans., 2020,49, 2468-2476

Ir- and Ru-doped layered double hydroxides as affordable heterogeneous catalysts for electrochemical water oxidation

L. Fagiolari, F. Zaccaria, F. Costantino, R. Vivani, C. K. Mavrokefalos, G. R. Patzke and A. Macchioni, Dalton Trans., 2020, 49, 2468 DOI: 10.1039/C9DT04306C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements