Issue 3, 2019

Selective production of aromatics from CO2

Abstract

Direct catalytic hydrogenation of CO2 to value-added aromatics, particularly the desirable para-xylene, not only provides a complementary route to the aromatics market but also helps reduce emissions of the greenhouse gas CO2. Herein, we report a composite Na/Fe and HZSM-5 catalyst system used for the direct and selective production of aromatics from CO2. Over the composite catalyst, the selectivity to aromatics in liquid hydrocarbons could reach over 94% under industrially relevant conditions, and the selectivity to para-xylene in total xylenes remarkably increased from 24–26% to 70% as HZSM-5 zeolite was coated with SiO2. Experiments and DFT calculations confirmed that the Na-promoted Fe catalyst and HZSM-5 with high Brønsted acidity are key factors for enhancing the CO2 conversion and aromatics synthesis. Specifically, SiO2-coated HZSM-5 can suppress the isomerization of para-xylene and para-ethyltoluene, which are preferentially formed in the inner channels of HZSM-5, and over a 100 h test, the composite catalyst showed highly stable CO2 conversion with relatively stable aromatics synthesis. Interestingly, in the case of SiO2-coated HZSM-5, the light olefins (C2[double bond, length as m-dash]–C4[double bond, length as m-dash]) remained largely in the gas phase rather than becoming isomerized and hydrogenated into light paraffins. This study opens a new way to reduce CO2 emissions via the efficient production of aromatics over a simple composite catalyst system.

Graphical abstract: Selective production of aromatics from CO2

Supplementary files

Article information

Article type
Paper
Submitted
28 Sep 2018
Accepted
25 Nov 2018
First published
26 Nov 2018

Catal. Sci. Technol., 2019,9, 593-610

Selective production of aromatics from CO2

Y. Xu, C. Shi, B. Liu, T. Wang, J. Zheng, W. Li, D. Liu and X. Liu, Catal. Sci. Technol., 2019, 9, 593 DOI: 10.1039/C8CY02024H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements