Issue 9, 2016

Mapping reactivities of aromatic models with a lignin disassembly catalyst. Steps toward controlling product selectivity

Abstract

Copper-doped porous metal oxides catalyze the one-pot disassembly of biomass-derived lignin via C–O bond hydrogenolysis and hydrodeoxygenation in supercritical methanol. This catalytic system cleanly converts lignin as well as lignocellulose composites, such as sawdust, to organic liquids with little or no formation of intractable tars or chars. However, this catalyst based on Earth-abundant components also catalyzes less desirable aromatic ring hydrogenations and various methylations that contribute to the diversity of products. In this context, we undertook a quantitative experimental and computational evaluation of model reactions relevant to the reductive disassembly of lignin by this catalyst system in order to determine quantitatively the rates of desirable and less desirable chemical steps that define the overall product selectivities. Global fitting analysis methods were used to map the temporal evolution of key intermediates and products and to elucidate networks that provide guidelines regarding the eventual fates of reactive intermediates in this catalysis system. Phenolic compounds display multiple reaction pathways, but substrates such as benzene, toluene, and alkyl- and alkoxy-substituted aromatics are considerably more stable under these conditions. These results indicate that modifying this catalytic system in a way that controls and channels the reactivity of phenolic intermediates should improve selectivity toward producing valuable aromatic chemicals from biomass-derived lignin. To this end we demonstrate that the O-methylating agent dimethyl carbonate can intercept the phenol intermediate formed from hydrogenolysis of the model compound benzyl phenyl ether. Trapping the phenol as anisole thus gave much higher selectivity towards aromatic products.

Graphical abstract: Mapping reactivities of aromatic models with a lignin disassembly catalyst. Steps toward controlling product selectivity

Supplementary files

Article information

Article type
Paper
Submitted
15 Sep 2015
Accepted
25 Nov 2015
First published
27 Nov 2015

Catal. Sci. Technol., 2016,6, 2984-2994

Author version available

Mapping reactivities of aromatic models with a lignin disassembly catalyst. Steps toward controlling product selectivity

C. M. Bernt, G. Bottari, J. A. Barrett, S. L. Scott, K. Barta and P. C. Ford, Catal. Sci. Technol., 2016, 6, 2984 DOI: 10.1039/C5CY01555C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements