Simultaneous fabrication of PDMS through-holes for three-dimensional microfluidic applications
Abstract
Here we describe a simple yet efficient approach to making through-holes in a bound polydimethylsiloxane
* Corresponding authors
a
Department of Biomedical Engineering, University of Michigan, 2200 Bonisteel Blvd, Ann Arbor, Michigan, USA
E-mail:
takayama@umich.edu
b Macromolecular Science and Engineering Center, University of Michigan, 2300 Hayward St., Ann Arbor, Michigan, USA
Here we describe a simple yet efficient approach to making through-holes in a bound polydimethylsiloxane
B. Mosadegh, M. Agarwal, Y. Torisawa and S. Takayama, Lab Chip, 2010, 10, 1983 DOI: 10.1039/C003590D
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content