Issue 15, 2010

Enhanced sensitivity volatile detection with low power integrated micromechanical resonators

Abstract

Very high aspect (length/thickness) ratio doubly clamped beams with integrated piezoelectric transducers are demonstrated for low power sensing of volatiles. The described approach allows for high yield fabrication of a dense array of suspended resonators that can be individually functionalized. Upon polymer coating, the resonators become highly sensitive to absorption of volatile compounds, allowing for detection at ppm-level concentrations of low-molecular weight analytes. The determined sensitivity enhancement is due to the significant contribution of vapor absorption-induced polymer swelling that results in axial stress formation in length restricted high aspect ratio beams.

Graphical abstract: Enhanced sensitivity volatile detection with low power integrated micromechanical resonators

Article information

Article type
Paper
Submitted
14 Dec 2009
Accepted
27 Apr 2010
First published
18 May 2010

Lab Chip, 2010,10, 1976-1982

Enhanced sensitivity volatile detection with low power integrated micromechanical resonators

D. M. Karabacak, S. H. Brongersma and M. Crego-Calama, Lab Chip, 2010, 10, 1976 DOI: 10.1039/B926170B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements