Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Chemically functionalized cellulose triboelectret nanogenerator for machine-learning-enabled tactile sensing
Sunidhi Mishraa,
Dalip Sainib,
Sudip Naskarb,
Sourav Ghosha,
Bidya Mondalb,
Dipankar Mandal*b and
Pradip K. Maji*a
aDepartment of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Saharanpur Campus, Saharanpur, 247001, Uttar Pradesh, India. E-mail: pradip@pe.iitr.ac.in; Fax: +91-7895965010
bQuantum Materials and Devices Unit, Institute of Nano Science and Technology, Knowledge City, Sector 81, Mohali 140306, Punjab, India. E-mail: dmandal@inst.ac.in
First published on 7th April 2026
Abstract
Correction for ‘Chemically functionalized cellulose triboelectret nanogenerator for machine-learning-enabled tactile sensing’ by Sunidhi Mishra et al., Mater. Horiz., 2026, https://doi.org/10.1039/d6mh00061d.
The authors regret that in the published article Fig. 5b and c images lack y-axis values and labels. The corrected version of Fig. 5 is shown in this notice.
 | ||
| Fig. 5 Electrical performance of the E-TENG. (a) Schematic representation of the E-TENG. (b) Open-circuit voltage (Voc), and (c) short-circuit current (Isc) are measured at various frequencies. (d) Mechano-sensitivity plot for different pressures, (e) plot of output voltage and instantaneous output power density at different load resistances, and (f) stability, durability, and repeatability for 90 days. Finite element analysis (FEA) for (g) the triboelectric response from the E-TENG, and the simulated potential distribution of the E-TENG at different distances of (i) 0, (ii) 1, (iii) 3, (iv) 5, (v) 7, and (vi) 10 mm between the NC and SPCA; (h) the electret response from the E-TENG, and the distribution of (i) potential, (ii) displacement, and (iii) stress under the application of a 50 N mechanical force. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2026 |