Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/D5TA90153G
(Correction)
J. Mater. Chem. A, 2025, 13, 23143-23143
Correction: Pure hydrogen and sulfur production from H2S by an electrochemical approach using a NiCu–MoS2 catalyst
Mukesh
Kumar
and
Tharamani C.
Nagaiah
*
Department of Chemistry, Indian Institute of Technology Ropar, Rupnagar, Punjab 140001, India. E-mail: tharamani@iitrpr.ac.in
Received
26th June 2025
, Accepted 26th June 2025
First published on 2nd July 2025
Abstract
Correction for ‘Pure hydrogen and sulfur production from H2S by an electrochemical approach using a NiCu–MoS2 catalyst’ by Mukesh Kumar et al., J. Mater. Chem. A, 2022, 10, 13031–13041, https://doi.org/10.1039/D2TA02751H.
The authors regret that in Fig. 1a the noise in some parts of the XRD patterns was similar. These data had been recorded at another institute, as the authors didn’t have the required facility at their institute at the time of measurement. Therefore, for clarification they have synthesised the materials again and recorded the P-XRD patterns for all four samples at their own institute. The newly measured XRD patterns are shown in Fig. 1 below. The authors apologise for this error and confirm that this correction doesn’t alter any scientific conclusions in this Journal of Materials Chemistry A paper.
 | ||
| Fig. 1 (a) XRD patterns of various catalysts. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2025 |